Duckmaster boat rebuild.

[Botiz630]

So basically one gun

Better than 2 guns in the bottom of a soaking wet and muddy boat. Are you expecting to hunt with more than 2-3 people? It's like you've forgotten how shitty the bottom of a well used duck boat can get. I clean mine out all the time and even now there is atleast 10lbs of shitty mud/sticks/grass/leaves in there. Storage rocks.

Flint must shoot a nova because he wants to leave it in the floor.

Worse. A mossberg 500 and a stoeger p350

I bought a p350 as a poor high school student. It provided some laughs on its way to earning the title of "worst shotgun ever".

Does yours jam a lot? Mine did every single time it was fired. You'd get one shot and that was it.

[FlintRiverFowler]

So basically one gun

Better than 2 guns in the bottom of a soaking wet and muddy boat. Are you expecting to hunt with more than 2-3 people? It's like you've forgotten how shitty the bottom of a well used duck boat can get. I clean mine out all the time and even now there is atleast 10lbs of shitty mud/sticks/grass/leaves in there. Storage rocks.

Flint must shoot a nova because he wants to leave it in the floor.

Worse. A mossberg 500 and a stoeger p350

I bought a p350 as a poor high school student. It provided some laughs on its way to earning the title of "worst shotgun ever".

Does yours jam a lot? Mine did every single time it was fired. You'd get one shot and that was it.

YUP! All the fkn time.
Same with the mossberg sometimes. One hitter quitter is what I call it.

[Woody]

Old Jammy

[FlintRiverFowler]

ImageUploadedByTapatalk1414785323.550917.jpg

ImageUploadedByTapatalk1414785337.196705.jpg

Done.

[LaFlamaBlanca]

ImageUploadedByTapatalk1414785323.550917.jpg

ImageUploadedByTapatalk1414785337.196705.jpg

Done.

Awesome, now let's take it out.

[FlintRiverFowler]

ImageUploadedByTapatalk1414785323.550917.jpg

ImageUploadedByTapatalk1414785337.196705.jpg

Done.

Awesome, now let's take it out.

Should be ready by the time your swomp gets here so we can take both out.

[Olly]

Are you going to paint it?

[FlintRiverFowler]

Are you going to paint it?

shopping around for rubberized non skid coating, but you may remember the eva foam mats I bought to finish it off.

[FlintRiverFowler]

Gonna go with herculiner. AND both gun boxes.
Tried to pick up the herculiner this morning after work but I guess nobody opens before 9 on Sundays.

[The Duck Hammer]

Good decision on the gun boxes.

[Flightstopper]

Damnit Flint now DH thinks he is right.

[FlintRiverFowler]

Damnit Flint now DH thinks he is right.

If I decide I don't like two boxes I'll rip the damn left one back out again.

[The Duck Hammer]

Damnit Flint now DH and Olly think they're right.

FIFY

[Olly]

Me thinking I'm right isn't hard to do.

[The Duck Hammer]

Me thinking I'm right isn't hard to do.

Same here.

[Goldfish]

Fuck the foam, cut it apart and have two shelves per box, plus the top to set shit on. It'll look like those Michigan boys' diver rigs with decoys set in the shelves along the side

[FlintRiverFowler]

Maybe some day.

[FlintRiverFowler]

ImageUploadedByTapatalk1415045939.528355.jpg

Time to finish this boat.

[The Duck Hammer]

Easy steps. Can't wait to see this one play out.

[Olly]

I told Flint this but I'll say it. Herculiner gets a bad rap. I've used it twice in two jeeps. Shit is awesome it's all about the prep work.

[FlintRiverFowler]

ImageUploadedByTapatalk1415053211.046416.jpg

ImageUploadedByTapatalk1415053226.170520.jpg

First coat done. It seems to be kinda soaking in to the fiberglass at the top. Can't be a bad thing can it?

[FlintRiverFowler]

Easy steps. Can't wait to see this one play out.

Well what would you have coated it with?

[Botiz630]

Turning out to be a cool little boat. Not sure if you've posted previously in this thread but what kind of speeds are you expecting? About how much do you think she weighs with the changes you've made?

[FlintRiverFowler]

Watching this stuff dry. Messing with the wiring....looks like a nightmare but I'm just gonna have to bring the fluke meter home from work and find all the ends.

ImageUploadedByTapatalk1415054533.050055.jpg

ImageUploadedByTapatalk1415054555.668261.jpg

At least it's all neatly run through that conduit and the gun box has a switch panel.

[FlintRiverFowler]

Turning out to be a cool little boat. Not sure if you've posted previously in this thread but what kind of speeds are you expecting? About how much do you think she weighs with the changes you've made?

I've actually taken this thing out once after I got all the rotten floor out and was running low 20s with a trashed prop.
I'm expecting mid 20s once I get a new prop unloaded. Maybe even mid 20s loaded. Got a 81 erude 25.
Don't know the weight but it's kinda heavy. Definitely heavier than an aluminum Jon of the same size.

[Olly]

I'll be home for thanksgiving if you want help with the wiring.

[FlintRiverFowler]

I'll be home for thanksgiving if you want help with the wiring.

Gona have to be done with it before then but thanks for the offer. We open the Saturday before.

[The Duck Hammer]

Easy steps. Can't wait to see this one play out.

Well what would you have coated it with?

That stuff. I was just giving you hell.

[FlintRiverFowler]

Easy steps. Can't wait to see this one play out.

Well what would you have coated it with?

That stuff. I was just giving you hell.

douchebag

[grizz18]

I told Flint this but I'll say it. Herculiner gets a bad rap. I've used it twice in two jeeps. Shit is awesome it's all about the prep work.

I'll stand behind Herculiner as well. Love the stuff. I've done 2 boats with it, full interior.