Duck rigs

Duck boats and duck boat blinds!

Re: Duck rigs

Postby duckkillerclyde » Fri Jun 15, 2012 12:47 pm

Personally, I think it blends in pretty good.

I don't see a black motor sticking out. The stern is to the left of the photo.

Image
duckkillerclyde
 
Posts: 904
Joined: Thu Jun 14, 2012 11:16 am

Duck rigs

Postby Westie25 » Fri Jun 15, 2012 12:57 pm

You just have to scuff it up. It's not worth it to me. It can be covered rather than painted.
User avatar
Westie25
 
Posts: 3657
Joined: Tue Jun 05, 2012 4:46 am
Location: Memphis, TN

Re: Duck rigs

Postby duckkillerclyde » Fri Jun 15, 2012 1:03 pm

Westie25 wrote:You just have to scuff it up. It's not worth it to me. It can be covered rather than painted.


I tried with a scotch bright pad. didn't really do much. I'm not too worried about keeping her 'new' looking as I built the blind too narrow and it has some gouges in the cowling anyway from trimming it all the way up.
duckkillerclyde
 
Posts: 904
Joined: Thu Jun 14, 2012 11:16 am

Re: Duck rigs

Postby Bufflehead » Fri Jun 22, 2012 9:13 pm

17' carolina skiff, 90hp yamaha
21' carolina skiff, 115 hp yamaha
15' phatbuoy z marine, 15hp yamaha(want a 25 but i don't go very far so it's hard to spend money on one)
12' starcraft, use the 15 or a 2.5hp yamaha if we aren't going far


have more boats but, those are what i hunt out of
Bufflehead
 
Posts: 1500
Joined: Mon Jun 18, 2012 8:43 pm

Re: Duck rigs

Postby Bufflehead » Fri Jun 22, 2012 9:15 pm

duckkillerclyde wrote:
Westie25 wrote:You just have to scuff it up. It's not worth it to me. It can be covered rather than painted.


I tried with a scotch bright pad. didn't really do much. I'm not too worried about keeping her 'new' looking as I built the blind too narrow and it has some gouges in the cowling anyway from trimming it all the way up.
120grit sandpaper and flat oil based brush on paint for base coat. after that, spray away
Bufflehead
 
Posts: 1500
Joined: Mon Jun 18, 2012 8:43 pm

Re: Duck rigs

Postby QH's Paw » Fri Jun 22, 2012 10:01 pm

My boat while I was working on the blind. It's a 1648 Tracker Grizzly with Mercury 50hp pump
Image

Image

Image
I'll try to find some actual boat pics when I'm at home.
QH's Paw
 
Posts: 4392
Joined: Sun Jun 17, 2012 3:22 am

Re: Duck rigs

Postby duckkillerclyde » Fri Jun 22, 2012 10:13 pm

where did you get that tarp?
duckkillerclyde
 
Posts: 904
Joined: Thu Jun 14, 2012 11:16 am

Re: Duck rigs

Postby QH's Paw » Sat Jun 23, 2012 8:09 am

duckkillerclyde wrote:where did you get that tarp?

Tarp?
QH's Paw
 
Posts: 4392
Joined: Sun Jun 17, 2012 3:22 am

Re: Duck rigs

Postby duckkillerclyde » Sat Jun 23, 2012 2:16 pm

QH's Paw wrote:
duckkillerclyde wrote:where did you get that tarp?

Tarp?



net or whatever you want to call it.
duckkillerclyde
 
Posts: 904
Joined: Thu Jun 14, 2012 11:16 am

Re: Duck rigs

Postby duckkillerclyde » Sat Jun 23, 2012 7:53 pm

3legged_lab wrote:Heres my baby.
Image



What kind and size of boat is that?
duckkillerclyde
 
Posts: 904
Joined: Thu Jun 14, 2012 11:16 am

Re: Duck rigs

Postby duckkillerclyde » Sat Jun 23, 2012 8:23 pm

excel f4?
duckkillerclyde
 
Posts: 904
Joined: Thu Jun 14, 2012 11:16 am

Re: Duck rigs

Postby QH's Paw » Sat Jun 23, 2012 10:17 pm

Here's one with the blind down.
Image
QH's Paw
 
Posts: 4392
Joined: Sun Jun 17, 2012 3:22 am

Re: Duck rigs

Postby huntntech » Mon Jun 25, 2012 9:47 am

Tracker Grizzly 1754 with 50hp Merc
boat2.JPG
YOU MUST REGISTER TO VIEW THIS IMAGE.
User avatar
huntntech
 
Posts: 745
Joined: Mon Jun 25, 2012 9:10 am
Location: southern illinois

Re: Duck rigs

Postby 3legged_lab » Mon Jun 25, 2012 10:32 pm

duckkillerclyde wrote:excel f4?

No, it is an Excel, but its from before the F4 models came along. Its a 1754
Bootlipkiller wrote: all the mallards I killed today had boners do to my epic calling.
User avatar
3legged_lab
WFF Supporter
 
Posts: 17344
Joined: Mon Jun 04, 2012 9:19 pm
Location: OREGON

Re: Duck rigs

Postby QH's Paw » Wed Jun 27, 2012 12:54 pm

Another pic of my current boat on the water. Yes, those are birds on the water in the background.

Image

A pic of my previous boat(18' Jetcraft sled,150hp pump). Man I miss that boat.

Image
QH's Paw
 
Posts: 4392
Joined: Sun Jun 17, 2012 3:22 am

Re: Duck rigs

Postby Flightstopper » Wed Jun 27, 2012 1:15 pm

[quote="QH's Paw"]Another pic of my current boat on the water. Yes, those are birds on the water in the background.

Image

I'm guessing that's with "Reddog"?
AKPirate wrote:Jason is usually right but sometimes wrong
User avatar
Flightstopper
WFF Forum Moderator
 
Posts: 9754
Joined: Mon Jun 04, 2012 5:46 pm
Location: Pflugerville, Tx

Re: Duck rigs

Postby QH's Paw » Wed Jun 27, 2012 1:33 pm

Flightstopper wrote:
QH's Paw wrote:Another pic of my current boat on the water. Yes, those are birds on the water in the background.

Image

I'm guessing that's with "Reddog"?

Thereddog, not to be confused with reddog. Both are from Oregon and are on DHC.
I have invited them both over to here.
QH's Paw
 
Posts: 4392
Joined: Sun Jun 17, 2012 3:22 am

Re: Duck rigs

Postby Flightstopper » Wed Jun 27, 2012 1:35 pm

QH's Paw wrote:
Flightstopper wrote:
QH's Paw wrote:Another pic of my current boat on the water. Yes, those are birds on the water in the background.

Image

I'm guessing that's with "Reddog"?

Thereddog, not to be confused with reddog. Both are from Oregon and are on DHC.
I have invited them both over to here.


That's right, I couldn't remeber exactly. Look forward to him showing up :thumbsup: Very cool pic
AKPirate wrote:Jason is usually right but sometimes wrong
User avatar
Flightstopper
WFF Forum Moderator
 
Posts: 9754
Joined: Mon Jun 04, 2012 5:46 pm
Location: Pflugerville, Tx

Duck rigs

Postby Westie25 » Wed Jun 27, 2012 2:08 pm

I enjoyed the red dogs post very much. Hope he shows up over here.
User avatar
Westie25
 
Posts: 3657
Joined: Tue Jun 05, 2012 4:46 am
Location: Memphis, TN

Re: Duck rigs

Postby Olly » Thu Jun 28, 2012 10:49 am

How mine sits now.

uploadfromtaptalk1340898774880.jpg


Sent from your honey hole.
YOU MUST REGISTER TO VIEW THIS IMAGE.
“If ye love wealth better than liberty, the tranquility of servitude better than the animating contest of freedom, go home from us in peace. We ask not your counsels or arms. Crouch down and lick the hands which feed you. May your chains set lightly upon you, and may posterity forget that ye were our countrymen.” ― Samuel Adams
User avatar
Olly
WFF Administrator
 
Posts: 15522
Joined: Wed May 30, 2012 9:05 am

Re: Duck rigs

Postby capt1972 » Thu Jun 28, 2012 6:44 pm

started the new blind today. And no jehler the motor isn't painted.





blind 2.jpg
YOU MUST REGISTER TO VIEW THIS IMAGE.
ΜΟΛΩΝ ΛΑΒΕ

The Tree of Liberty Must be Refreshed From Time to Time With the BLOOD OF TYRANTS
User avatar
capt1972
WFF Forum Moderator
 
Posts: 5582
Joined: Sun Jun 03, 2012 6:33 pm
Location: Where the ducks arnt

Duck rigs

Postby jehler » Thu Jun 28, 2012 7:20 pm

Lame
FREE THE QUOTE STREAM!
User avatar
jehler
 
Posts: 11453
Joined: Wed Jun 06, 2012 6:18 pm

Re: Duck rigs

Postby capt1972 » Thu Jun 28, 2012 7:45 pm

jehler wrote:Lame

technically my FIL's boat. I would paint it but he doesn't want to, something about resale. I told him he doesn't use it now so it's basically already sold
ΜΟΛΩΝ ΛΑΒΕ

The Tree of Liberty Must be Refreshed From Time to Time With the BLOOD OF TYRANTS
User avatar
capt1972
WFF Forum Moderator
 
Posts: 5582
Joined: Sun Jun 03, 2012 6:33 pm
Location: Where the ducks arnt

Re: Duck rigs

Postby blackrhino » Fri Jun 29, 2012 3:48 pm

Here is mine. 13'6" with a 18 hp Copperhead.
Image
blackrhino
 
Posts: 165
Joined: Mon Jun 25, 2012 8:09 am

Duck rigs

Postby Westie25 » Fri Jun 29, 2012 3:51 pm

I likes dat.
User avatar
Westie25
 
Posts: 3657
Joined: Tue Jun 05, 2012 4:46 am
Location: Memphis, TN

Re: Duck rigs

Postby Olly » Fri Jun 29, 2012 3:51 pm

blackrhino wrote:Here is mine. 13'6" with a 18 hp Copperhead.
Image


I really like that, I've been thinking about getting a 2nd smaller boat between 10ft-12ft for when I hunt alone.
“If ye love wealth better than liberty, the tranquility of servitude better than the animating contest of freedom, go home from us in peace. We ask not your counsels or arms. Crouch down and lick the hands which feed you. May your chains set lightly upon you, and may posterity forget that ye were our countrymen.” ― Samuel Adams
User avatar
Olly
WFF Administrator
 
Posts: 15522
Joined: Wed May 30, 2012 9:05 am

Re: Duck rigs

Postby QH's Paw » Fri Jun 29, 2012 6:13 pm

blackrhino wrote:Here is mine. 13'6" with a 18 hp Copperhead.
Image

Is that a four rivers?
Almost bought one a couple years ago.
QH's Paw
 
Posts: 4392
Joined: Sun Jun 17, 2012 3:22 am

Re: Duck rigs

Postby blackrhino » Sun Jul 01, 2012 11:56 am

Not a four rivers. They are made by a company here in Florida. 13'6" and 68" wide. With me and hunting gear it runs 25 mph. I spent yesterday camouflaging the top deck and installed a led bow light. I bought it just before duck season last year. So far I've coated the bottom with Gator glide, installed led interior lights, bilge pump and had a snap on condura travel cover made for it.
blackrhino
 
Posts: 165
Joined: Mon Jun 25, 2012 8:09 am

Duck rigs

Postby Flightstopper » Sun Jul 01, 2012 11:59 am

blackrhino wrote:Not a four rivers. They are made by a company here in Florida. 13'6" and 68" wide. With me and hunting gear it runs 25 mph. I spent yesterday camouflaging the top deck and installed a led bow light. I bought it just before duck season last year. So far I've coated the bottom with Gator glide, installed led interior lights, bilge pump and had a snap on condura travel cover made for it.


That's a barge! Post up more pics. Who makes it?
AKPirate wrote:Jason is usually right but sometimes wrong
User avatar
Flightstopper
WFF Forum Moderator
 
Posts: 9754
Joined: Mon Jun 04, 2012 5:46 pm
Location: Pflugerville, Tx

Re: Duck rigs

Postby grizz18 » Mon Jul 09, 2012 2:47 pm

Heres some pictures of the boat I ran last year. I sold it this spring, but really enjoyed it and kinda wish I still had it.

I bought the boat, motor and trailer for $800, put about $300 into it. It was a late 80s 17 Bass Tracker hull, and 99 Yamaha 25hp tiller motor.

It was in decent shape. I basically stripped it inside and out. I build a custom rear bench/gas inclosure with dry storage. Also put a new deck on the front with storage under. The floor plan was great...WIDE OPEN.

I painted the oustide and inside with Rustoleum Primer, then Parkers duck paint. Then I stenciled with Styx-River stencil. I also Herculined the entire inside of the boat. I also added some lights on the front for decoy set up, and swamp hunting.

Its was the first boat transformation I did, and really enjoyed the process. Lotta beer, and sweat went into that boat.
YOU MUST REGISTER TO VIEW THIS IMAGE.
User avatar
grizz18
 
Posts: 1032
Joined: Mon Jun 25, 2012 7:32 am

Next

Return to Duck Boat & Mud Motor Forum

Who is online

Users browsing this forum: No registered users and 25 guests