Duckmaster boat rebuild.
Re: Duckmaster boat rebuild.
by FlintRiverFowler » Tue Nov 04, 2014 2:40 pm
My advice on herculiner is do not buy the kit. The roller sucks. The brush puts on a much thicker coat. I think most guys have enough shit in their toolbox/ garage to effectively prep something for laying this stuff down. Just buy the gallon can and use any paint brush. I did the second coat with the brush and it's much thicker and more even.
-
FlintRiverFowler - Posts: 6386
- Joined: Wed May 30, 2012 1:08 pm
- Location: Georgia
Re: Duckmaster boat rebuild.
by FlintRiverFowler » Tue Nov 04, 2014 4:07 pm
NuffDaddy wrote:Bed liner that shit and call it good.
You were right all along
-
FlintRiverFowler - Posts: 6386
- Joined: Wed May 30, 2012 1:08 pm
- Location: Georgia
Re: Duckmaster boat rebuild.
by The Duck Hammer » Tue Nov 04, 2014 5:27 pm
Don't tell him that.
“When you're at the end of your rope, tie a knot and hold on” - Theodore Roosevelt
WFF Prostaff
Olly wrote: We're still the bastard pirates of the duck forum world.
WFF Prostaff
-
The Duck Hammer - Posts: 14027
- Joined: Fri Feb 22, 2013 7:42 pm
- Location: The Chicken House
Re: Duckmaster boat rebuild.
by NuffDaddy » Tue Nov 04, 2014 5:32 pm
FlintRiverFowler wrote:NuffDaddy wrote:Bed liner that shit and call it good.
You were right all along
I'm always right.
-
NuffDaddy 
- Posts: 10142
- Joined: Sun Aug 19, 2012 2:05 pm
- Location: Saginaw Bay, Michigan
Re: Duckmaster boat rebuild.
by Olly » Tue Nov 04, 2014 6:00 pm
NuffDaddy wrote:FlintRiverFowler wrote:NuffDaddy wrote:Bed liner that shit and call it good.
You were right all along
I'm always right.
Except when I'm right.
“If ye love wealth better than liberty, the tranquility of servitude better than the animating contest of freedom, go home from us in peace. We ask not your counsels or arms. Crouch down and lick the hands which feed you. May your chains set lightly upon you, and may posterity forget that ye were our countrymen.” ― Samuel Adams
-
Olly 
- Posts: 15522
- Joined: Wed May 30, 2012 9:05 am
Re: Duckmaster boat rebuild.
by Flightstopper » Tue Nov 04, 2014 6:40 pm
Nobody listens to Jason.
AKPirate wrote:Jason is usually right but sometimes wrong
-
Flightstopper - Posts: 9754
- Joined: Mon Jun 04, 2012 5:46 pm
- Location: Pflugerville, Tx
Re: Duckmaster boat rebuild.
by FlintRiverFowler » Tue Nov 04, 2014 7:07 pm
NuffDaddy wrote:Who the hell is Jason??
He is
-
FlintRiverFowler - Posts: 6386
- Joined: Wed May 30, 2012 1:08 pm
- Location: Georgia
Re: Duckmaster boat rebuild.
by NuffDaddy » Tue Nov 04, 2014 7:07 pm
FlintRiverFowler wrote:NuffDaddy wrote:Who the hell is Jason??
He is
Who?
-
NuffDaddy - Posts: 10142
- Joined: Sun Aug 19, 2012 2:05 pm
- Location: Saginaw Bay, Michigan
Re: Duckmaster boat rebuild.
by FlintRiverFowler » Tue Nov 04, 2014 7:08 pm
NuffDaddy wrote:FlintRiverFowler wrote:NuffDaddy wrote:Who the hell is Jason??
He is
Who?
Him
-
FlintRiverFowler - Posts: 6386
- Joined: Wed May 30, 2012 1:08 pm
- Location: Georgia
Re: Duckmaster boat rebuild.
by Flightstopper » Tue Nov 04, 2014 7:08 pm
I is.
AKPirate wrote:Jason is usually right but sometimes wrong
-
Flightstopper - Posts: 9754
- Joined: Mon Jun 04, 2012 5:46 pm
- Location: Pflugerville, Tx
Re: Duckmaster boat rebuild.
by NuffDaddy » Tue Nov 04, 2014 7:08 pm
???????
YOU MUST REGISTER TO VIEW THIS IMAGE.
-
NuffDaddy - Posts: 10142
- Joined: Sun Aug 19, 2012 2:05 pm
- Location: Saginaw Bay, Michigan
Re: Duckmaster boat rebuild.
by FlintRiverFowler » Tue Nov 04, 2014 7:10 pm
Ok stop it. Serious boat thread here you guy.
-
FlintRiverFowler - Posts: 6386
- Joined: Wed May 30, 2012 1:08 pm
- Location: Georgia
Re: Duckmaster boat rebuild.
by NuffDaddy » Tue Nov 04, 2014 7:12 pm
lets see some pics!!! It's been 3 months. I want to see this thing done!!FlintRiverFowler wrote:Ok stop it. Serious boat thread here you guy.
-
NuffDaddy - Posts: 10142
- Joined: Sun Aug 19, 2012 2:05 pm
- Location: Saginaw Bay, Michigan
Re: Duckmaster boat rebuild.
by Olly » Tue Nov 04, 2014 7:12 pm
FlintRiverFowler wrote:Ok stop it. Serious boat thread here you guy.
Alright alright.
“If ye love wealth better than liberty, the tranquility of servitude better than the animating contest of freedom, go home from us in peace. We ask not your counsels or arms. Crouch down and lick the hands which feed you. May your chains set lightly upon you, and may posterity forget that ye were our countrymen.” ― Samuel Adams
-
Olly - Posts: 15522
- Joined: Wed May 30, 2012 9:05 am
Re: Duckmaster boat rebuild.
by FlintRiverFowler » Tue Nov 04, 2014 7:13 pm
NuffDaddy wrote:lets see some pics!!! It's been 3 months. I want to see this thing done!!FlintRiverFowler wrote:Ok stop it. Serious boat thread here you guy.
Scroll back a few pages. Lotsa pics.
-
FlintRiverFowler - Posts: 6386
- Joined: Wed May 30, 2012 1:08 pm
- Location: Georgia
Re: Duckmaster boat rebuild.
by The Duck Hammer » Tue Nov 04, 2014 11:36 pm
Good stuff Flint.
(I'm talking about the Jason thing but to keep it on topic I'm talking about the boat)
(I'm talking about the Jason thing but to keep it on topic I'm talking about the boat)
“When you're at the end of your rope, tie a knot and hold on” - Theodore Roosevelt
WFF Prostaff
Olly wrote: We're still the bastard pirates of the duck forum world.
WFF Prostaff
-
The Duck Hammer - Posts: 14027
- Joined: Fri Feb 22, 2013 7:42 pm
- Location: The Chicken House
Re: Duckmaster boat rebuild.
by FlintRiverFowler » Wed Nov 05, 2014 11:10 am
Fitting/ positioning. Two box-shelves is def the way to go.
YOU MUST REGISTER TO VIEW THIS IMAGE.
-
FlintRiverFowler - Posts: 6386
- Joined: Wed May 30, 2012 1:08 pm
- Location: Georgia
Re: Duckmaster boat rebuild.
by The Duck Hammer » Wed Nov 05, 2014 11:15 am
Those shelves made out of stainless?
“When you're at the end of your rope, tie a knot and hold on” - Theodore Roosevelt
WFF Prostaff
Olly wrote: We're still the bastard pirates of the duck forum world.
WFF Prostaff
-
The Duck Hammer - Posts: 14027
- Joined: Fri Feb 22, 2013 7:42 pm
- Location: The Chicken House
Re: Duckmaster boat rebuild.
by Woody » Wed Nov 05, 2014 11:20 am
FlintRiverFowler wrote:
Fitting/ positioning. Two box-shelves is def the way to go.
looks kinda shinny
Have you ever wondered why your dick still looks brand new, but your face is starting to look like an aging pirate?
-
Woody - Posts: 6625
- Joined: Wed Mar 13, 2013 7:41 am
Re: Duckmaster boat rebuild.
by Olly » Wed Nov 05, 2014 11:43 am
It'll never be that clean ever again.
“If ye love wealth better than liberty, the tranquility of servitude better than the animating contest of freedom, go home from us in peace. We ask not your counsels or arms. Crouch down and lick the hands which feed you. May your chains set lightly upon you, and may posterity forget that ye were our countrymen.” ― Samuel Adams
-
Olly - Posts: 15522
- Joined: Wed May 30, 2012 9:05 am
Re: Duckmaster boat rebuild.
by FlintRiverFowler » Wed Nov 05, 2014 11:50 am
Damn sick of being $15-ed and $20-ed to death on this damn boat.
YOU MUST REGISTER TO VIEW THIS IMAGE.
-
FlintRiverFowler - Posts: 6386
- Joined: Wed May 30, 2012 1:08 pm
- Location: Georgia
Re: Duckmaster boat rebuild.
by The Duck Hammer » Wed Nov 05, 2014 11:55 am
That's what a boat does.
“When you're at the end of your rope, tie a knot and hold on” - Theodore Roosevelt
WFF Prostaff
Olly wrote: We're still the bastard pirates of the duck forum world.
WFF Prostaff
-
The Duck Hammer - Posts: 14027
- Joined: Fri Feb 22, 2013 7:42 pm
- Location: The Chicken House
Re: Duckmaster boat rebuild.
by FlintRiverFowler » Wed Nov 05, 2014 12:56 pm
The Duck Hammer wrote:That's what a boat does.
Really? I figured boats were relatively maintenance free and inexpensive to own operate.... Now the time when I need the smiley that bashes it's head on the brick wall.
-
FlintRiverFowler - Posts: 6386
- Joined: Wed May 30, 2012 1:08 pm
- Location: Georgia
Re: Duckmaster boat rebuild.
by Woody » Wed Nov 05, 2014 1:09 pm
FlintRiverFowler wrote:Damn sick of being $15-ed and $20-ed to death on this damn boat.
Could be worse, my boats have been $250-ed and $300eding me to death.
Have you ever wondered why your dick still looks brand new, but your face is starting to look like an aging pirate?
-
Woody - Posts: 6625
- Joined: Wed Mar 13, 2013 7:41 am
Re: Duckmaster boat rebuild.
by FlintRiverFowler » Wed Nov 05, 2014 1:24 pm
Woody wrote:FlintRiverFowler wrote:Damn sick of being $15-ed and $20-ed to death on this damn boat.
Could be worse, my boats have been $250-ed and $300eding me to death.
I think I've got around 600$ in this rebuild. After gettin the boat trailer motor for $1600
-
FlintRiverFowler - Posts: 6386
- Joined: Wed May 30, 2012 1:08 pm
- Location: Georgia
Re: Duckmaster boat rebuild.
by FlintRiverFowler » Wed Nov 05, 2014 1:26 pm
To add to that I was in so much hate with my old boat I was gettin ready to go out and finance a gator trax. This has still ended up being cheaper by far and I've been able to pay cash for everything... So zero debt and it's mine outright. Can't complain too much I guess.
-
FlintRiverFowler - Posts: 6386
- Joined: Wed May 30, 2012 1:08 pm
- Location: Georgia
Re: Duckmaster boat rebuild.
by blockmaker » Wed Nov 05, 2014 3:46 pm
FlintRiverFowler wrote:To add to that I was in so much hate with my old boat I was gettin ready to go out and finance a gator trax. This has still ended up being cheaper by far and I've been able to pay cash for everything... So zero debt and it's mine outright. Can't complain too much I guess.
Once again flint. Great job. Very cool boat. Paid for is just the gravy on your biscuit!!
- blockmaker
- Posts: 130
- Joined: Fri Mar 08, 2013 7:04 am
- Location: Paducah ky
Re: Duckmaster boat rebuild.
by FlintRiverFowler » Wed Nov 05, 2014 3:58 pm
Thanks man. Here's a few pics of what I've worked on today.
It's all wired up. Both boxes installed. Getting ready to finish the install of the shark eye nav nights and then possibly the EVA foam floor mats. Getting real close. Gonna be taking it out Saturday AM for an early morning test run that will hopefully be a scouting trip too. Also gonna be breaking in @laflamablanca 's new backwater swomp 23 that morning. So this thread will be pic heavy that day.
It's all wired up. Both boxes installed. Getting ready to finish the install of the shark eye nav nights and then possibly the EVA foam floor mats. Getting real close. Gonna be taking it out Saturday AM for an early morning test run that will hopefully be a scouting trip too. Also gonna be breaking in @laflamablanca 's new backwater swomp 23 that morning. So this thread will be pic heavy that day.
YOU MUST REGISTER TO VIEW THIS IMAGE.
-
FlintRiverFowler - Posts: 6386
- Joined: Wed May 30, 2012 1:08 pm
- Location: Georgia
Return to Duck Boat & Mud Motor Forum
Who is online
Users browsing this forum: No registered users and 232 guests