Page 1 of 2

Long line weights

PostPosted: Thu Jul 18, 2013 4:24 pm
by Goldfish
Just did the brakes on the girlfriends car. Looked at the old rotors, and thought they might work as a long lone weight. Decent idea, or ridiculous?

sent from a phancy fone

Re: Long line weights

PostPosted: Thu Jul 18, 2013 4:34 pm
by DeadEye_Dan
I know lots if guys that use old rotors

Re: Long line weights

PostPosted: Thu Jul 18, 2013 5:07 pm
by Goldfish
uploadfromtaptalk1374185187689.jpg

Was all the encouragement I needed. Figured I'd cut down on the shiney factor too

sent from a phancy fone

Re: Long line weights

PostPosted: Thu Jul 18, 2013 5:53 pm
by assateague
Guys here use them as anchors for crab trot lines, also.

Re: Long line weights

PostPosted: Thu Jul 18, 2013 6:13 pm
by The Duck Hammer
I like your camo job. They will work great as weights.

Re: Long line weights

PostPosted: Thu Jul 18, 2013 6:29 pm
by Goldfish
Shoot, that was about a 5 second camo job. Rustolium-ed them with black primer, then took the green and khaki (didn't have brown), one in each hand, and just criss crossed them quick. Just enough to try and make them blend into rocky bottom, figure mud they'll be buried anyways

sent from a phancy fone

Re: Long line weights

PostPosted: Thu Jul 18, 2013 6:32 pm
by Goldfish
So, use these for the up wind side, and a littler weight for the down wind side? I'm thinking of making about 3 lines with 6 or 7 decoys per line

sent from a phancy fone

Re: Long line weights

PostPosted: Thu Jul 18, 2013 6:40 pm
by DeadEye_Dan
How heavy are they?

How deep do you run them?

Re: Long line weights

PostPosted: Thu Jul 18, 2013 6:41 pm
by DeadEye_Dan
With 6-7 decoys and a solid weight like that, I doubt I'd even bother with a downwind anchor

Re: Long line weights

PostPosted: Thu Jul 18, 2013 6:57 pm
by Goldfish
I'd eventually like to expand the number of decoys per line, but that's all I have for now. I also don't have any line or rigging yet. Planning on getting sinking line, but don't know if I'll go for the long line clips, or just tie on the decoy lines for now.


I am just beginning this whole diver hunting thing as this is the first year we can open water hunt

sent from a phancy fone

Re: Long line weights

PostPosted: Thu Jul 18, 2013 7:14 pm
by jehler
Window sash weights for the downwind, real easy to drag without snags

Re: Long line weights

PostPosted: Thu Jul 18, 2013 7:22 pm
by DeadEye_Dan
Goldfish wrote:I'd eventually like to expand the number of decoys per line, but that's all I have for now. I also don't have any line or rigging yet. Planning on getting sinking line, but don't know if I'll go for the long line clips, or just tie on the decoy lines for now.


I am just beginning this whole diver hunting thing as this is the first year we can open water hunt

sent from a phancy fone


Decoy Rigs out of Whiting, Indiana for line.
The stiffer the braid, the less prone it is to tangle.
And to that point, if you don't have longline clips you'll end up having to cut and re-tie decoys when you foul a line, and the time lost and line lost will make the cost of the clips seem cheap.
You can get clips from Doctari for less than $1/per

Re: Long line weights

PostPosted: Thu Jul 18, 2013 7:23 pm
by DeadEye_Dan
Sash weights work good, I came across a bunch of 1 & 2 lb cannon ball weights for cheap, those work good too.

Re: Long line weights

PostPosted: Tue Jul 29, 2014 9:05 pm
by Woody
Do y'all think these will work for long line weights?
It's about 4.5 lb.

Re: Long line weights

PostPosted: Tue Jul 29, 2014 9:44 pm
by 3legged_lab
Did you stick it together with bubble gum?

Re: Long line weights

PostPosted: Tue Jul 29, 2014 10:53 pm
by DeadEye_Dan
Should be ok. I'd scrap that gizmo that you have for a anchor tie and weld a couple chain links to it

Re: Long line weights

PostPosted: Wed Jul 30, 2014 5:09 am
by Woody
3legged_lab wrote:Did you stick it together with bubble gum?


Yeah, what you don't think that will work?

Re: Long line weights

PostPosted: Wed Jul 30, 2014 5:10 am
by Woody
DeadEye_Dan wrote:Should be ok. I'd scrap that gizmo that you have for a anchor tie and weld a couple chain links to it

That's probably a better way to do it.

Re: Long line weights

PostPosted: Thu Aug 21, 2014 7:05 am
by Woody
image.jpg

image.jpg

That better, Dan?

Re: Long line weights

PostPosted: Thu Aug 21, 2014 10:35 am
by DeadEye_Dan
The anchors should work fine, I'm guessing that at some point you'll rethink having all the line in a bucket, but probably not until it freezes once

Re: Long line weights

PostPosted: Thu Aug 21, 2014 10:37 am
by Woody
DeadEye_Dan wrote:The anchors should work fine, I'm guessing that at some point you'll rethink having all the line in a bucket, but probably not until it freezes once


Well shit...

Re: Long line weights

PostPosted: Thu Aug 21, 2014 10:38 am
by Olly
DeadEye_Dan wrote:The anchors should work fine, I'm guessing that at some point you'll rethink having all the line in a bucket, but probably not until it freezes once


I thought that's how it was done? I'm thinking about putting together a mini diver rig with a small tender and one layout and I was going to do that with my lines.

Re: Long line weights

PostPosted: Thu Aug 21, 2014 10:39 am
by Woody
Olly wrote:
DeadEye_Dan wrote:The anchors should work fine, I'm guessing that at some point you'll rethink having all the line in a bucket, but probably not until it freezes once


I thought that's how it was done? I'm thinking about putting together a mini diver rig with a small tender and one layout and I was going to do that with my lines.


Dan winds them up on extension cord spools, if I am not mistaken.

Re: Long line weights

PostPosted: Thu Aug 21, 2014 10:42 am
by Olly
Woody wrote:Dan winds them up on extension cord spools, if I am not mistaken.


Ahhh that makes a lot more sense.

Re: Long line weights

PostPosted: Thu Aug 21, 2014 10:58 am
by DeadEye_Dan
Try to keep this in mind when doing any of this stuff - "sure it works now / not a pain in the ass when it's 75°, how is this going to work when it's 30° or 20°??"

Don't worry. The first couple seasons are the roughest, but you'll learn quick. It's impossible to anticipate all the ways things can get screwed up until you just go and do it.

Re: Long line weights

PostPosted: Thu Aug 21, 2014 11:33 am
by Woody
DeadEye_Dan wrote:Try to keep this in mind when doing any of this stuff - "sure it works now / not a pain in the ass when it's 75°, how is this going to work when it's 30° or 20°??"

Don't worry. The first couple seasons are the roughest, but you'll learn quick. It's impossible to anticipate all the ways things can get screwed up until you just go and do it.


Well I listened to ya and during lunch I went and bought spools. Tomorrow I'll return all but two (keep the anchors in) of those buckets.

Re: Long line weights

PostPosted: Wed Sep 03, 2014 5:40 pm
by jehler
Where in the hell did y'all get the buckets idea?!? ;)

I use buckets exclusively but I have tons of storage, also, most of my lines are tarred in a home made concoction that shed water and doesn't freeze, I've done spools and buckets are faster for me, but the way we set up is a bit different

Re: Long line weights

PostPosted: Wed Sep 03, 2014 7:47 pm
by Woody
Haha, it's a mystery.

Actually after making that post I made a smart decision and only bought one spool and after trying it out I'm not too fancy on it. Right now I'm going to run 3 lines in that spool and the other 5 in buckets at least until freezing is a problem. After running both side by side I might ask you for that concoction if you don't mind.

Re: Long line weights

PostPosted: Wed Sep 03, 2014 9:53 pm
by Bufflehead
Drill a bunch of drain holes in the bucket and freezing probably won't be to much of a problem.

I usually leave my decoys attached to the mainline and pile them in the floor or in trash cans. If I do take them off, I use a spool for the mainline.

Re: Long line weights

PostPosted: Thu Sep 04, 2014 6:31 am
by jehler
Yep, holes are important.

Woody you take several tubes of solar seal caulk and with a drill and paint mixer mix it with mineral spirits in an empty paint can, with a top so you can reseal, until it is about like pudding in consistency. Get two people and some rubber gloves, put the rope in and gooch it up, then have one guy pull while the other holds the string between his fingers stripping the excess away, like milking a cow. Don't let it hit the ground, tie it off, we hung between trees, and let tinder a couple weeks. Stays pliable and water resistant for years. A horrible mess though