boot fix

[flight control]

My four year old neoprene waders have developped a hole in the boot sole. It seems like a shame to throw them out, as that is the only thing wrong with them, and a new pair is not in the budget for this year. It's just a small hole around the mid-sole that leaks when I walk.

Does anyone have a good fix for this?

[Olly]

I did this last year.

If it's on the rubber part if the boot go get a bicycle tube repair kit and then I also applied Aqua Seal over the top of that. Better than new.

[jehler]

Brew gun is the creator of the best boot fix I ever seen, post a pic of frankenboot would ya crut

[flight control]

I did this last year.

If it's on the rubber part if the boot go get a bicycle tube repair kit and then I also applied Aqua Seal over the top of that. Better than new.

Aqua seal was my first thought, but I'll add the tube patch too. It's not so bad now, but I would not want any moisture in my boots come Nov/Dec

[Redbeard]

Sorry Flight but Boot is F'd up beyond repair


#tazincali

[flight control]

Sorry Flight but Boot is F'd up beyond repair


#tazincali

I was affraid of that. But at least he seems happy.

[Rick]

Prep with acetone and then 3M 5200 in and over the hole.

(AquaSeal wants to be 5200 when it grows up.)

[flight control]

Prep with acetone and then 3M 5200 in and over the hole.

(AquaSeal wants to be 5200 when it grows up.)

I'll look around and see if I can find some.

[flight control]

I just googled it and thats the stuff we use to seal through hulls on the boat. That stuff really is tough.

[rebelp74]

Sorry Flight but Boot is F'd up beyond repair


#tazincali

[Bootlipkiller]

Sorry Flight but Boot is F'd up beyond repair


#tazincali

x2


Sent from an undisclosed location on the river

[jarbo03]

Anybody tried that new SG-20 stuff?

#tazincali

[NuffDaddy]

I just googled it and thats the stuff we use to seal through hulls on the boat. That stuff really is tough.

That's what I used on my boot. Did it before season started, and it's still holding fine. I use 5200 for everything. The bottom of my boat is almost coated in it. . No leaks though.