Texas rig help

[Lamboicon]

I have ordered the line and everything I need to rig my decoys I order 10lb of 6oz egg weights. Well that's only like 26 weights. I have old strap lead that i have from friends. I want to melt them down and make my own. Where can i buy the best mold.

[Olly]

I have ordered the line and everything I need to rig my decoys I order 10lb of 6oz egg weights. Well that's only like 26 weights. I have old strap lead that i have from friends. I want to melt them down and make my own. Where can i buy the best mold.

If you don't want to melt them down just use the strap weights, I've re-used my old ones they work just fine.

[capt1972]

any fishing tackle shop should be able to get one for you.

[3legged_lab]

I bought my mold off of Ebay, its a Do-it brand 6, 8 ounce egg mold, it makes 1 of each size at a time. Make sure you give them a few seconds to fully set up in the middle or when you pull the pin the inside of the egg will cave in on the opening. I had very poor luck with trying to drill these out, and found it easier to just re-pour the bad castings. I think it cost me around 35 bucks including shipping. If you dont want to buy the mold I could sell you some of my extra weights.

[Flightstopper]

Mini muffin pan fill half full and drill the middle out.

[3legged_lab]

Oops, I thought this about "Texas" rigs

[Lamboicon]

Ha man I need spell check for sure. I am going to look at bass pro today and see what molds they have. Thanks for the help

[3legged_lab]

Ha man I need spell check for sure. I am going to look at bass pro today and see what molds they have. Thanks for the help

believe me, I'm cheap, check ebay too.

[Lamboicon]

Well the kit came in and in about 30 min I had a few done. Think it's going to work out great

ImageUploadedByTapatalk1346991715.930211.jpg