Page 1 of 2

Boat blind build.

PostPosted: Sat Jan 12, 2013 6:58 pm
by obxbufflehead
Started out with 3/4" PVC and built a frame.
ImageUploadedByTapatalk1358034780.306684.jpg

The 4by4 with the holes was already on the boat from the old owner. So we built the blind to work with it.
ImageUploadedByTapatalk1358034805.289425.jpg

Then we put poultry netting on the frame to hold the grass. Sorry don't have any pics of it with out the grass in it.
ImageUploadedByTapatalk1358034961.278848.jpg

ImageUploadedByTapatalk1358035095.913128.jpg

ImageUploadedByTapatalk1358035113.376338.jpg

ImageUploadedByTapatalk1358035133.918648.jpg

Re: Boat blind build.

PostPosted: Sat Jan 12, 2013 7:04 pm
by Lamboicon
Looks pretty good do you have anything to go over the top so when the ducks fly over they don't see you

Re: Boat blind build.

PostPosted: Sat Jan 12, 2013 7:09 pm
by obxbufflehead
No not yet. We shoot mostly divers so I don't think will have to worry about it. Just get down and don't move a lot an I think we'll be fine.

Re: Boat blind build.

PostPosted: Sat Jan 12, 2013 7:40 pm
by Eric Haynes
obxbufflehead wrote:No not yet. We shoot mostly divers so I don't think will have to worry about it. Just get down and don't move a lot an I think we'll be fine.


That's correct, even for puddlers. We made nearly the same blind as you did a couple years ago, but yours looks better. Just don't move and you are good to go.

Only problem I had with the blind was that it was kinda permanent, which made it a pain to drive around with.

Re: Boat blind build.

PostPosted: Sat Jan 12, 2013 7:43 pm
by obxbufflehead
Eric Haynes wrote:
obxbufflehead wrote:No not yet. We shoot mostly divers so I don't think will have to worry about it. Just get down and don't move a lot an I think we'll be fine.


That's correct, even for puddlers. We made nearly the same blind as you did a couple years ago, but yours looks better. Just don't move and you are good to go.

Only problem I had with the blind was that it was kinda permanent, which made it a pain to drive around with.

We made mine where it will fold like a wallet and lay in the boat while your running. I'll take some pics of it folded later tonight and post them.

Re: Boat blind build.

PostPosted: Sat Jan 12, 2013 9:31 pm
by jehler
PVC is gonna break, especially if it gets cold, see how it works, get it dialed in and then re-do it with aluminum

Re: Boat blind build.

PostPosted: Sat Jan 12, 2013 9:33 pm
by Eric Haynes
jehler wrote:PVC is gonna break, especially if it gets cold, see how it works, get it dialed in and then re-do it with aluminum


He lives in NC.

Re: Boat blind build.

PostPosted: Sat Jan 12, 2013 9:38 pm
by jehler
Eric Haynes wrote:
jehler wrote:PVC is gonna break, especially if it gets cold, see how it works, get it dialed in and then re-do it with aluminum


He lives in NC.

Yeah but it will still break, either by getting drunk and falling into it or bending a girl on to it, better off with metal

Re: Boat blind build.

PostPosted: Sat Jan 12, 2013 9:39 pm
by 3legged_lab
jehler wrote:PVC is gonna break, especially if it gets cold, see how it works, get it dialed in and then re-do it with aluminum

1/2'' EMT

sent from my Galaxy S3 using tapatalk 2

Re: Boat blind build.

PostPosted: Sat Jan 12, 2013 9:45 pm
by Eric Haynes
jehler wrote:
Eric Haynes wrote:
jehler wrote:PVC is gonna break, especially if it gets cold, see how it works, get it dialed in and then re-do it with aluminum


He lives in NC.

Yeah but it will still break, either by getting drunk and falling into it or bending a girl on to it, better off with metal

OBX, if you need me to come test it out against jehlers claims, you let me know.

Re: Boat blind build.

PostPosted: Sat Jan 12, 2013 9:58 pm
by obxbufflehead
Eric Haynes wrote:
jehler wrote:
Eric Haynes wrote:
jehler wrote:PVC is gonna break, especially if it gets cold, see how it works, get it dialed in and then re-do it with aluminum


He lives in NC.

Yeah but it will still break, either by getting drunk and falling into it or bending a girl on to it, better off with metal

OBX, if you need me to come test it out against jehlers claims, you let me know.

Hahahahaha ok I will.

Re: Boat blind build.

PostPosted: Sat Jan 12, 2013 10:02 pm
by Goldfish
Mine is pvc, and it has only broken a couple if times, lol

sent from a phancy fone

Re: Boat blind build.

PostPosted: Sat Jan 12, 2013 10:04 pm
by obxbufflehead
Goldfish wrote:Mine is pvc, and it has only broken a couple if times, lol

sent from a phancy fone

Yeah but look where you live. It almost never gets that cold here.

Re: Boat blind build.

PostPosted: Sat Jan 12, 2013 10:07 pm
by Eric Haynes
obxbufflehead wrote:
Goldfish wrote:Mine is pvc, and it has only broken a couple if times, lol

sent from a phancy fone

Yeah but look where you live. It almost never gets that cold here.


Didn't you read jehler's post? He broke it bendin the ol' lady over it. Works great for divers. All you do it attach flags to their hands and head. Divers come piling in.

Re: Boat blind build.

PostPosted: Sat Jan 12, 2013 10:09 pm
by obxbufflehead
Eric Haynes wrote:
obxbufflehead wrote:
Goldfish wrote:Mine is pvc, and it has only broken a couple if times, lol

sent from a phancy fone

Yeah but look where you live. It almost never gets that cold here.


Didn't you read jehler's post? He broke it bendin the ol' lady over it. Works great for divers. All you do it attach flags to their hands and head. Divers come piling in.

Hahahahahahahahahahahaha. We've never used flags. I have thought about making one or two though.

Re: Boat blind build.

PostPosted: Sat Jan 12, 2013 10:42 pm
by Goldfish
obxbufflehead wrote:
Goldfish wrote:Mine is pvc, and it has only broken a couple if times, lol

sent from a phancy fone

Yeah but look where you live. It almost never gets that cold here.

Totally not cold
uploadfromtaptalk1358048572868.jpg


sent from a phancy fone

Re: Boat blind build.

PostPosted: Mon Jan 14, 2013 1:02 am
by obxbufflehead
Here are some pictures of the blind folded up. Sorry there not of it folded in the boat but we had to take it off to put it in the water.
ImageUploadedByTapatalk1358143140.994495.jpg

ImageUploadedByTapatalk1358143312.571926.jpg

The pics are of both sides folded and laying on each other. It's actually 2 different pieces that fold like a trifold wallet. The center supports go in to a T piece once its on the boat.

Re: Boat blind build.

PostPosted: Mon Jan 14, 2013 10:01 am
by Goldfish
I think it'll work just fine. Looks pretty decent, and it'll let other hunters know you are there, lol.

Re: Boat blind build.

PostPosted: Mon Jan 14, 2013 10:04 am
by obxbufflehead
Goldfish wrote:I think it'll work just fine. Looks pretty decent, and it'll let other hunters know you are there, lol.

What are you trying to say?

Re: Boat blind build.

PostPosted: Mon Jan 14, 2013 10:17 am
by Goldfish
obxbufflehead wrote:
Goldfish wrote:I think it'll work just fine. Looks pretty decent, and it'll let other hunters know you are there, lol.

What are you trying to say?

That if you look around a lake, it's easy to spot other hunters and their blinds. Mine is probably easier to see than yours if it makes you feel better:
uploadfromtaptalk1358176611548.jpg



sent from a phancy fone

Re: Boat blind build.

PostPosted: Mon Jan 14, 2013 10:21 am
by obxbufflehead
Goldfish wrote:
obxbufflehead wrote:
Goldfish wrote:I think it'll work just fine. Looks pretty decent, and it'll let other hunters know you are there, lol.

What are you trying to say?

That if you look around a lake, it's easy to spot other hunters and their blinds. Mine is probably easier to see than yours if it makes you feel better:
uploadfromtaptalk1358176611548.jpg



sent from a phancy fone

Ok I see. But here there are no lakes, unless you go inland. But from the blinds I hunt I can see about 15-20 other blinds. It's not going to be any different than what is already out there. Plus it should work well for hunting next to the shore where we have tall grass stuff(don't know what it's called) that looks just like those grass mats.

Re: Boat blind build.

PostPosted: Mon Jan 14, 2013 11:45 am
by Baysider
Probably phragmites.

Re: Boat blind build.

PostPosted: Mon Jan 14, 2013 12:04 pm
by Olly
My biggest grip with PVC is that it's not strong enough to hold on to. You're gonna be in and out of that boat so much and wanting to hold onto the blind frame and it'll break if you even try.

Re: Boat blind build.

PostPosted: Mon Jan 14, 2013 4:51 pm
by Goldfish
I don't know why you would say that. If I'm hunting in my boat, I usually stay in it. If I'm not, I'm ditching it, or else I hop out the back by the motor and use that to hold on to. Never had a problem.

sent from a phancy fone

Re: Boat blind build.

PostPosted: Mon Jan 14, 2013 6:04 pm
by jehler
PVC is bush league.
End of discussion

Re: Boat blind build.

PostPosted: Mon Jan 14, 2013 6:08 pm
by Westie25
jehler wrote:PVC is bush league.
End of discussion


With Tom hanks on this one.

Re: Boat blind build.

PostPosted: Mon Jan 14, 2013 6:20 pm
by obxbufflehead
jehler wrote:PVC is bush league.
End of discussion

Bush league?

Re: Boat blind build.

PostPosted: Mon Jan 14, 2013 6:20 pm
by Goldfish
jehler wrote:PVC is bush league.
End of discussion


Call me George.


My blind would be a PITA if it were conduit. I don't know if it would be heavier? I'll try and dig up a pic of all the piping for it in a second when I get back in the truck so I can hook the charger up to the phone. Long story short, it has to come down, but it fully encloses you.

Re: Boat blind build.

PostPosted: Mon Jan 14, 2013 6:23 pm
by jehler
Goldfish wrote:
jehler wrote:PVC is bush league.
End of discussion


Call me George.


My blind would be a PITA if it were conduit. I don't know if it would be heavier? I'll try and dig up a pic of all the piping for it in a second when I get back in the truck so I can hook the charger up to the phone. Long story short, it has to come down, but it fully encloses you.

Aluminum

Re: Boat blind build.

PostPosted: Mon Jan 14, 2013 6:26 pm
by jehler
obxbufflehead wrote:
jehler wrote:PVC is bush league.
End of discussion

Bush league?

http://youtu.be/MFrpLjOXjlk