what do do with a barrel

[aunt betty]

This.

1373400083950.jpg

[broccoli]

Or this

ImageUploadedByTapatalk1373409388.060401.jpg

[Flightstopper]

This.

1373400083950.jpg

Outboard muffs are way too cheap to mess with that.

[Bootlipkiller]

This.

1373400083950.jpg

Outboard muffs are way too cheap to mess with that.

No shit.

[assateague]

Unless your intake is in the prop. Like mine is. Which means I have to tote a trash can around and fill that bitch up with water every time I mess with it.

[Bootlipkiller]

Unless your intake is in the prop. Like mine is. Which means I have to tote a trash can around and fill that bitch up with water every time I mess with it.

I've never even heard of that! What kind of motor.

[Flightstopper]

Unless your intake is in the prop. Like mine is. Which means I have to tote a trash can around and fill that bitch up with water every time I mess with it.

Sounds like an "Assafact". Not biting.

[Bootlipkiller]

Unless your intake is in the prop. Like mine is. Which means I have to tote a trash can around and fill that bitch up with water every time I mess with it.

Sounds like an "Assafact". Not biting.

He got me didn't he.

[assateague]

Unless your intake is in the prop. Like mine is. Which means I have to tote a trash can around and fill that bitch up with water every time I mess with it.

Sounds like an "Assafact". Not biting.

He got me didn't he.

No. No shit this time. (Although I do like "Assafact") It's a little motor, a 3.5HP Nissan. Not sure, but I think a lot of the smaller motors have the intake located close to mine. Impeller is right behind the prop, driven by the prop shaft.

[Bootlipkiller]

Unless your intake is in the prop. Like mine is. Which means I have to tote a trash can around and fill that bitch up with water every time I mess with it.

Sounds like an "Assafact". Not biting.

He got me didn't he.

No. No shit this time. (Although I do like "Assafact") It's a little motor, a 3.5HP Nissan. Not sure, but I think a lot of the smaller motors have the intake located close to mine. Impeller is right behind the prop, driven by the prop shaft.

Crazy

[NuffDaddy]

Can't get the RPMs too high with water muffs though. Maybe AB is having top end trouble....

[assateague]

It's pretty nice when it comes to replacing something. To replace the $8 impeller, I just have to pull a cotter pin and loosen two bolts. Easy peasy.

[Bootlipkiller]

Can't get the RPMs too high with water muffs though. Maybe AB is having top end trouble....

Don't give him excuses

[NuffDaddy]

Can't get the RPMs too high with water muffs though. Maybe AB is having top end trouble....

Don't give him excuses

:lol::lol::lol:
Just saying.....he might actually have a point this time.

[rebelp74]

Unless your intake is in the prop. Like mine is. Which means I have to tote a trash can around and fill that bitch up with water every time I mess with it.

Sounds like an "Assafact". Not biting.

He got me didn't he.

No. No shit this time. (Although I do like "Assafact") It's a little motor, a 3.5HP Nissan. Not sure, but I think a lot of the smaller motors have the intake located close to mine. Impeller is right behind the prop, driven by the prop shaft.

I was honestly thinking some kind of motor that you made(jimmy rigged) for about $50. I was picturing something along the lines of a weed eater with an edger blade for the prop, that you some how made the motor water cooled.

[Goldfish]

Why would you cut it sideways like that?? Just stand it up and fill it

sent from a phancy fone

[assateague]

Then what? Jack up the boat and trailer to get that fucker in the barrel? C'mon, Goldie, think it through, man!

[Goldfish]

Really? You tip the motor up, bring the barrel over, lower the motor into the barrel, and fill it with water.

Come on.

sent from a phancy fone

[Feelin' Fowl]

Really? You tip the motor up, bring the barrel over, lower the motor into the barrel, and fill it with water.

Come on.

sent from a phancy fone

And how do you empty said barrel?

[Goldfish]

Pull the plug, or grab a hose and let it gravity feed out till you can tip it. Or put it on a roller before you fill it.

This isn't rocket science folks

sent from a phancy fone

[Flightstopper]

Really? You tip the motor up, bring the barrel over, lower the motor into the barrel, and fill it with water.

Come on.

sent from a phancy fone

And how do you empty said barrel?

Buckshot.

[rebelp74]

[quote="Goldfish"]Pull the plug, or grab a hose and let it gravity feed out till you can tip it. Or put it on a roller before you fill it.
No shit, it's just a barrel.

[Feelin' Fowl]

Pull the plug, or grab a hose and let it gravity feed out till you can tip it. Or put it on a roller before you fill it.

This isn't rocket science folks

sent from a phancy fone

Or instead of creating a bunch of extra work for yourself, use it on its side.

[Goldfish]

Yea, cuz cutting a hole in half the side and sealing the top isn't more work...

sent from a phancy fone

[Feelin' Fowl]

Yea, cuz cutting a hole in half the side and sealing the top isn't more work...

sent from a phancy fone

Come on Goldie! Applying labor one time vs. every single time.

I don't know about you, but I would rather have a pita project once, rather than a bunch of times...

[rebelp74]

Yea, cuz cutting a hole in half the side and sealing the top isn't more work...

sent from a phancy fone

Come on Goldie! Applying labor one time vs. every single time.

I don't know about you, but I would rather have a pita project once, rather than a bunch of times...

There is absolutely nothing pita about dumping over a drum.

[3legged_lab]

You guys are all stupid, my motor doesn't need water.

[Feelin' Fowl]

Yea, cuz cutting a hole in half the side and sealing the top isn't more work...

sent from a phancy fone

Come on Goldie! Applying labor one time vs. every single time.

I don't know about you, but I would rather have a pita project once, rather than a bunch of times...

There is absolutely nothing pita about dumping over a drum.

If you have a low motor/trailer, and have to syphon the water out because you can't physically just dump the barrel over, IS a pita. Especially when compared to using a barrel on its side, and having the ability to dump it, with NO EXTRA WORK.

[rebelp74]

Yea, cuz cutting a hole in half the side and sealing the top isn't more work...

sent from a phancy fone

Come on Goldie! Applying labor one time vs. every single time.

I don't know about you, but I would rather have a pita project once, rather than a bunch of times...

There is absolutely nothing pita about dumping over a drum.

If you have a low motor/trailer, and have to syphon the water out because you can't physically just dump the barrel over, IS a pita. Especially when compared to using a barrel on its side, and having the ability to dump it, with NO EXTRA WORK.

Fucking lazy ass Americans...

[Goldfish]

How often are you using the barrel to run your motor? If it's more than once a year, you've got something going on that you can't fix so bring it to boomerang to fix it. Otherwise, why trash a perfectly good barrel that everyone wants to turn into a smoker?

sent from a phancy fone