Duck rigs

[QH's Paw]

My boat while I was working on the blind. It's a 1648 Tracker Grizzly with Mercury 50hp pump





I'll try to find some actual boat pics when I'm at home.

[duckkillerclyde]

where did you get that tarp?

[QH's Paw]

where did you get that tarp?

Tarp?

[duckkillerclyde]

where did you get that tarp?

Tarp?

net or whatever you want to call it.

[duckkillerclyde]

Heres my baby.

What kind and size of boat is that?

[duckkillerclyde]

excel f4?

[QH's Paw]

Here's one with the blind down.

[huntntech]

Tracker Grizzly 1754 with 50hp Merc

boat2.JPG

[3legged_lab]

excel f4?

No, it is an Excel, but its from before the F4 models came along. Its a 1754

[QH's Paw]

Another pic of my current boat on the water. Yes, those are birds on the water in the background.



A pic of my previous boat(18' Jetcraft sled,150hp pump). Man I miss that boat.

[Flightstopper]

[quote="QH's Paw"]Another pic of my current boat on the water. Yes, those are birds on the water in the background.



I'm guessing that's with "Reddog"?

[QH's Paw]

Another pic of my current boat on the water. Yes, those are birds on the water in the background.



I'm guessing that's with "Reddog"?

Thereddog, not to be confused with reddog. Both are from Oregon and are on DHC.
I have invited them both over to here.

[Flightstopper]

Another pic of my current boat on the water. Yes, those are birds on the water in the background.



I'm guessing that's with "Reddog"?

Thereddog, not to be confused with reddog. Both are from Oregon and are on DHC.
I have invited them both over to here.

That's right, I couldn't remeber exactly. Look forward to him showing up Very cool pic

[Westie25]

I enjoyed the red dogs post very much. Hope he shows up over here.

[Olly]

How mine sits now.

uploadfromtaptalk1340898774880.jpg

Sent from your honey hole.

[capt1972]

started the new blind today. And no jehler the motor isn't painted.

blind 2.jpg

[jehler]

Lame

[capt1972]

Lame

technically my FIL's boat. I would paint it but he doesn't want to, something about resale. I told him he doesn't use it now so it's basically already sold

[blackrhino]

Here is mine. 13'6" with a 18 hp Copperhead.

[Westie25]

I likes dat.

[Olly]

Here is mine. 13'6" with a 18 hp Copperhead.

I really like that, I've been thinking about getting a 2nd smaller boat between 10ft-12ft for when I hunt alone.

[QH's Paw]

Here is mine. 13'6" with a 18 hp Copperhead.

Is that a four rivers?
Almost bought one a couple years ago.

[blackrhino]

Not a four rivers. They are made by a company here in Florida. 13'6" and 68" wide. With me and hunting gear it runs 25 mph. I spent yesterday camouflaging the top deck and installed a led bow light. I bought it just before duck season last year. So far I've coated the bottom with Gator glide, installed led interior lights, bilge pump and had a snap on condura travel cover made for it.

[Flightstopper]

Not a four rivers. They are made by a company here in Florida. 13'6" and 68" wide. With me and hunting gear it runs 25 mph. I spent yesterday camouflaging the top deck and installed a led bow light. I bought it just before duck season last year. So far I've coated the bottom with Gator glide, installed led interior lights, bilge pump and had a snap on condura travel cover made for it.

That's a barge! Post up more pics. Who makes it?

[grizz18]

Heres some pictures of the boat I ran last year. I sold it this spring, but really enjoyed it and kinda wish I still had it.

I bought the boat, motor and trailer for $800, put about $300 into it. It was a late 80s 17 Bass Tracker hull, and 99 Yamaha 25hp tiller motor.

It was in decent shape. I basically stripped it inside and out. I build a custom rear bench/gas inclosure with dry storage. Also put a new deck on the front with storage under. The floor plan was great...WIDE OPEN.

I painted the oustide and inside with Rustoleum Primer, then Parkers duck paint. Then I stenciled with Styx-River stencil. I also Herculined the entire inside of the boat. I also added some lights on the front for decoy set up, and swamp hunting.

Its was the first boat transformation I did, and really enjoyed the process. Lotta beer, and sweat went into that boat.

[grizz18]

Last 2 pictures. More if anyone wants the stencil process. I have pictures of all steps.

[Flightstopper]

That motor alone was worth every bit of that. Wish I could have got my hands on it...

[huntntech]

Good job!! looks good!

[grizz18]

That motor alone was worth every bit of that. Wish I could have got my hands on it...

Dude posted it for $1100 at 4:25 pm. I called him at 4:31 and said I was 6 hrs away, and if he took $800 I'd be there by noon the next day. He said ok. I took the next day off and left at 4am, got there at 10am. Ran the motor, and drove away like I just hit the lotto.

[assateague]

Unless this is too personal, why'd you sell it? Looks like the perfect duck rig.