How do I fix this?

[Bufflehead]

I get 5200 from Lowe's. $12 for 10.5 ounce tube of fast cure. At our local store it's in the paint section with the other caulk and they have little "marine paint" section on the end of a aisle and usually have some there as well. Think slow cure is the same price.



You probably will not find it any cheaper than that. I have a Port Supply account (west marine wholesale) and can't get it any where near that price.

[Willie]

I put 5200 on all of the rivets on the bottom of my boat. It's held up very well until the last day of the season, and the ice tore some off. It's good stuff for sure.

[T Man]

I have 5200 holding down the dual battery tray in my boat. My bilge pumps are also 5200'd to the floor of the boat. Its some serious shit but takes a week to cure.

[NuffDaddy]

I have 5200 holding down the dual battery tray in my boat. My bilge pumps are also 5200'd to the floor of the boat. Its some serious shit but takes a week to cure.

Get the fast cure it only takes about 24hrs.

[FlintRiverFowler]

I have 5200 holding down the dual battery tray in my boat. My bilge pumps are also 5200'd to the floor of the boat. Its some serious shit but takes a week to cure.

Get the fast cure it only takes about 24hrs.

But is it as strong?

[NuffDaddy]

I have 5200 holding down the dual battery tray in my boat. My bilge pumps are also 5200'd to the floor of the boat. Its some serious shit but takes a week to cure.

Get the fast cure it only takes about 24hrs.

But is it as strong?

I'm not sure on that. I can find out though and let you know.

[NuffDaddy]

Both cure about as hard and strong, but the regular will slightly soak into wood for a better hold than the fast cure. But for what your doing fast cure will be fine.

[FlintRiverFowler]

Is the white 5200 ok? That's all they had at Home Depot. In boycotting lowes so fuck them. That's out of the question.

[Willie]

Is the white 5200 ok? That's all they had at Home Depot. In boycotting lowes so fuck them. That's out of the question.

It's all they make as far as I know.

[NuffDaddy]

Is the white 5200 ok? That's all they had at Home Depot. In boycotting lowes so fuck them. That's out of the question.

Yup. I thinks that's the fast cure stuff. The red is the regular I think.

[FlintRiverFowler]

Is the white 5200 ok? That's all they had at Home Depot. In boycotting lowes so fuck them. That's out of the question.

Yup. I thinks that's the fast cure stuff. The red is the regular I think.

Says it takes 7 days to cure.

[NuffDaddy]

Is the white 5200 ok? That's all they had at Home Depot. In boycotting lowes so fuck them. That's out of the question.

Yup. I thinks that's the fast cure stuff. The red is the regular I think.

Says it takes 7 days to cure.

Maybe not then. I've always bought the fast cure from Home Depot and it was always white. We use the week cure stuff at work and it's red. Must just be a dye.

[Willie]

Is the white 5200 ok? That's all they had at Home Depot. In boycotting lowes so fuck them. That's out of the question.

Yup. I thinks that's the fast cure stuff. The red is the regular I think.

Says it takes 7 days to cure.

I'm almost 99% sure the red tube is 3200, which isn't as strong as 5200. There's fast cure and regular. I'd give the regular 5200 4 or 5 days at least to let it cure.

[NuffDaddy]

3200 is 3Ms version of silicone.

[Bufflehead]

Is the white 5200 ok? That's all they had at Home Depot. In boycotting lowes so fuck them. That's out of the question.

Yup. I thinks that's the fast cure stuff. The red is the regular I think.

Says it takes 7 days to cure.

I'm almost 99% sure the red tube is 3200, which isn't as strong as 5200. There's fast cure and regular. I'd give the regular 5200 4 or 5 days at least to let it cure.

Red and white tube is fast cure 5200. Blue and white tube is regular 5200.


You can get slow cure 5200 that is black but you would have to go to marine supplier and it will be about $22 or more.

[Bufflehead]

Is the white 5200 ok? That's all they had at Home Depot. In boycotting lowes so fuck them. That's out of the question.

Yup. I thinks that's the fast cure stuff. The red is the regular I think.

Says it takes 7 days to cure.

Maybe not then. I've always bought the fast cure from Home Depot and it was always white. We use the week cure stuff at work and it's red. Must just be a dye.

The actual adhesive is red? I use 5200 all the time and have never seen red.


Maybe that is the mahogany color they make, never used.

[Bufflehead]

Is the white 5200 ok? That's all they had at Home Depot. In boycotting lowes so fuck them. That's out of the question.

Yup. I thinks that's the fast cure stuff. The red is the regular I think.

Says it takes 7 days to cure.

That's regular cure. Fast cure cures in 24 hours.

[assateague]

For fuck's sake, it's February, Flint. Just get whatever, put it on there, and come back in a month. Not like you're going to be going boating any time soon.

[Willie]

Is the white 5200 ok? That's all they had at Home Depot. In boycotting lowes so fuck them. That's out of the question.

Yup. I thinks that's the fast cure stuff. The red is the regular I think.

Says it takes 7 days to cure.

I'm almost 99% sure the red tube is 3200, which isn't as strong as 5200. There's fast cure and regular. I'd give the regular 5200 4 or 5 days at least to let it cure.

Red and white tube is fast cure 5200. Blue and white tube is regular 5200.


You can get slow cure 5200 that is black but you would have to go to marine supplier and it will be about $22 or more.

10-4...I need some to redo the rivets on my ride soon. They're all the same adhesive strength, right?

[FlintRiverFowler]

For fuck's sake, it's February, Flint. Just get whatever, put it on there, and come back in a month. Not like you're going to be going boating any time soon.

This is Georgia it's snowing outside right now, but it could very easily be in the high 80s within a few days.

[assateague]

But it won't be. Farmer's Almanac says you're screwed pretty much until March 1st.

[NuffDaddy]

Is the white 5200 ok? That's all they had at Home Depot. In boycotting lowes so fuck them. That's out of the question.

Yup. I thinks that's the fast cure stuff. The red is the regular I think.

Says it takes 7 days to cure.

Maybe not then. I've always bought the fast cure from Home Depot and it was always white. We use the week cure stuff at work and it's red. Must just be a dye.

The actual adhesive is red? I use 5200 all the time and have never seen red.


Maybe that is the mahogany color they make, never used.

Yes. I would guess it is dyed for, like you said, use on mahogany. We get it by the boxes, so I'm guessing it's special order.

[NuffDaddy]

Is the white 5200 ok? That's all they had at Home Depot. In boycotting lowes so fuck them. That's out of the question.

Yup. I thinks that's the fast cure stuff. The red is the regular I think.

Says it takes 7 days to cure.

I'm almost 99% sure the red tube is 3200, which isn't as strong as 5200. There's fast cure and regular. I'd give the regular 5200 4 or 5 days at least to let it cure.

Red and white tube is fast cure 5200. Blue and white tube is regular 5200.


You can get slow cure 5200 that is black but you would have to go to marine supplier and it will be about $22 or more.

10-4...I need some to redo the rivets on my ride soon. They're all the same adhesive strength, right?

As long as it says 5200 your good.

[Bufflehead]

10-4...I need some to redo the rivets on my ride soon. They're all the same adhesive strength, right?

As long as it says 5200 your good.

x2

[FlintRiverFowler]

But it won't be. Farmer's Almanac says you're screwed pretty much until March 1st.

Really? Wtf.

[ea oneal]

what motor year-model-ser# and i cn look it up i have a outboard shop.hell i might have the motor support,s u need on an old one
i keep some for part,s

It's a 1999 mercury 15 hp 4 stroke.
Serial number is OGB20630
Now I can't tell if those are zeros or Os so you may have to try different combinations of them.

ImageUploadedByTapatalk1391171998.178188.jpg

ImageUploadedByTapatalk1391172043.646898.jpg

i had to look in the part,s room i have a 2000 20 hp mid -no tiller arm -no clamps . upper and lower mounts look good. i think this will fit .let me know if this will help and we will get it to you

[3legged_lab]

Just wait a couple weeks, I hear they are coming out with the 5500 - only available at Lowe's.

[RonE]

Lots of posts about someone who wants to cheap out on some $85 motor mounts. Quit fucking around, start jacking off and sell the results to a sperm bank and take the money and spend it on the real thing. Jesus! We ain't going to send you any mounts and trying to Mickey Mouse the things is going to leave you stranded and no matter how much you tap-a-talk, when you are broke down there are few of us here that can tow you home. Probably lots of people that will tow you to the ramp for $200 though.

[AKPirate]

Lots of posts about someone who wants to cheap out on some $85 motor mounts. Quit fucking around, start jacking off and sell the results to a sperm bank and take the money and spend it on the real thing. Jesus! We ain't going to send you any mounts and trying to Mickey Mouse the things is going to leave you stranded and no matter how much you tap-a-talk, when you are broke down there are few of us here that can tow you home. Probably lots of people that will tow you to the ramp for $200 though.

[FlintRiverFowler]

Lots of posts about someone who wants to cheap out on some $85 motor mounts. Quit fucking around, start jacking off and sell the results to a sperm bank and take the money and spend it on the real thing. Jesus! We ain't going to send you any mounts and trying to Mickey Mouse the things is going to leave you stranded and no matter how much you tap-a-talk, when you are broke down there are few of us here that can tow you home. Probably lots of people that will tow you to the ramp for $200 though.

I guess you didn't read the first one safety ranger.