How do I fix this?

by **FlintRiverFowler** » Wed Jan 29, 2014 10:05 am

I can't even find the name of this part,
It's a rubber bushing where the engine mounts to the frame, one on each side below the power head, both are torn. It looks like the engine was rear ended or backed into something before I bought it. So I've been running this engine pretty much on the edge of falling off my boat. Anybody know what the name of this part is? I'd call it a "mount bushing" if I had to make up a name.

ImageUploadedByTapatalk1391007894.697573.jpg

by **Goldfish** » Thu Jan 30, 2014 10:41 pm

Is that a tiller or power trim?
I can't see what your talking about

by **ea oneal** » Fri Jan 31, 2014 12:39 am

what motor year-model-ser# and i cn look it up i have a outboard shop.hell i might have the motor support,s u need on an old one
i keep some for part,s

by **FlintRiverFowler** » Fri Jan 31, 2014 7:40 am

ea oneal wrote:what motor year-model-ser# and i cn look it up i have a outboard shop.hell i might have the motor support,s u need on an old one
i keep some for part,s

It's a 1999 mercury 15 hp 4 stroke.
Serial number is OGB20630
Now I can't tell if those are zeros or Os so you may have to try different combinations of them.

ImageUploadedByTapatalk1391171998.178188.jpg

ImageUploadedByTapatalk1391172043.646898.jpg

by **RonE** » Fri Jan 31, 2014 9:29 am

Looks like it is the upper mount. About $100 each. check out: http://www.boats.net/parts/search/Merc/ ... parts.html

by **FlintRiverFowler** » Fri Jan 31, 2014 9:51 am

RonE wrote:Looks like it is the upper mount. About $100 each. check out: http://www.boats.net/parts/search/Merc/ ... parts.html

Fuck. Anybody want to buy a 15?

by **jehler** » Fri Jan 31, 2014 9:53 am

Welfare motor

by **FlintRiverFowler** » Fri Jan 31, 2014 10:23 am

jehler wrote:Welfare motor

Listen outboard god. U think I could smash some shock bushings on something along those lines in there?

by **Goldfish** » Fri Jan 31, 2014 12:21 pm

I'll buy it for $150, which would put you $350 ahead since you didn't have to buy those bushings.

by **NuffDaddy** » Fri Jan 31, 2014 1:34 pm

I'll give you $200.

by **FlintRiverFowler** » Fri Jan 31, 2014 1:50 pm

Paid 500 for it. Which it ran my boat fine when broken, kinda wish I hadn't gone snooping around. Probly gona fab some new mounts

by **NuffDaddy** » Fri Jan 31, 2014 5:11 pm

FlintRiverFowler wrote:Paid 500 for it. Which it ran my boat fine when broken, kinda wish I hadn't gone snooping around. Probly gona fab some new mounts

Just redneck fix it. Maybe tie a cable to something in your boat and something to the motor. As a "just in case" kinda deal.

by **jehler** » Fri Jan 31, 2014 5:18 pm

I'll get you a number of a guy who deals in used parts, brew may have it, Jeff is his name, have sold him 100's of motors, bet he has some

by **jehler** » Fri Jan 31, 2014 5:20 pm

http://www.usedoutboardparts.com

by **rebelp74** » Fri Jan 31, 2014 5:30 pm

NuffDaddy wrote:
FlintRiverFowler wrote:Paid 500 for it. Which it ran my boat fine when broken, kinda wish I hadn't gone snooping around. Probly gona fab some new mounts

Just redneck fix it. Maybe tie a cable to something in your boat and something to the motor. As a "just in case" kinda deal.

You mean nigger rig it

by **FlintRiverFowler** » Fri Jan 31, 2014 5:31 pm

I do have a pretty nice welder at work...

by **FlintRiverFowler** » Fri Jan 31, 2014 5:31 pm

jehler wrote:I'll get you a number of a guy who deals in used parts, brew may have it, Jeff is his name, have sold him 100's of motors, bet he has some

So call the guy in the link you gave me and give him a part number?

by **FlintRiverFowler** » Fri Jan 31, 2014 5:44 pm

Well I sent him an email. Was afraid he wouldn't understand my accent. :lol:

by **NuffDaddy** » Fri Jan 31, 2014 5:53 pm

rebelp74 wrote:
NuffDaddy wrote:
FlintRiverFowler wrote:Paid 500 for it. Which it ran my boat fine when broken, kinda wish I hadn't gone snooping around. Probly gona fab some new mounts

Just redneck fix it. Maybe tie a cable to something in your boat and something to the motor. As a "just in case" kinda deal.

You mean nigger rig it

Whatever you want to call it.

by **jehler** » Fri Jan 31, 2014 6:35 pm

FlintRiverFowler wrote:Well I sent him an email. Was afraid he wouldn't understand my accent.

thats probably a wise choice

by **jehler** » Fri Jan 31, 2014 6:36 pm

I pass his place on the way to one of my jobsites

by **Goldfish** » Fri Jan 31, 2014 7:47 pm

Yous guys are ruining my chance at a new motor

by **jehler** » Fri Jan 31, 2014 7:50 pm

Goldfish wrote:Yous guys are ruining my chance at a new motor

what you want brotha? I live in the land of good used outboards

by **assateague** » Fri Jan 31, 2014 8:04 pm

How am I just now finding this out?

by **rebelp74** » Fri Jan 31, 2014 8:06 pm

by **capt1972** » Fri Jan 31, 2014 8:10 pm

NuffDaddy wrote:
FlintRiverFowler wrote:Paid 500 for it. Which it ran my boat fine when broken, kinda wish I hadn't gone snooping around. Probly gona fab some new mounts

Just redneck fix it. Maybe tie a cable to something in your boat and something to the motor. As a "just in case" kinda deal.

This is what the fuel line is for.

by **jehler** » Fri Jan 31, 2014 8:12 pm

assateague wrote:How am I just now finding this out?

ive said this at least 53 times!!!

Surrounded by fresh water that is froze 5 months if the year, and rich people, this is the Mecca of used outboards and I have the hook ups

by **RonE** » Fri Jan 31, 2014 8:14 pm

rebelp74 wrote:
NuffDaddy wrote:
FlintRiverFowler wrote:Paid 500 for it. Which it ran my boat fine when broken, kinda wish I hadn't gone snooping around. Probly gona fab some new mounts

Just redneck fix it. Maybe tie a cable to something in your boat and something to the motor. As a "just in case" kinda deal.

You mean nigger rig it

It is not called "nigger rig" anymore...........From now on use the term "Presidential Solution".

by **rebelp74** » Fri Jan 31, 2014 8:15 pm

RonE wrote:
rebelp74 wrote:
NuffDaddy wrote:
FlintRiverFowler wrote:Paid 500 for it. Which it ran my boat fine when broken, kinda wish I hadn't gone snooping around. Probly gona fab some new mounts

Just redneck fix it. Maybe tie a cable to something in your boat and something to the motor. As a "just in case" kinda deal.

You mean nigger rig it

It is not called "nigger rig" anymore...........From now on use the term "Presidential Solution".

I like that

by **FlintRiverFowler** » Fri Jan 31, 2014 8:16 pm

jehler wrote:
assateague wrote:How am I just now finding this out?
ive said this at least 53 times!!!

Surrounded by fresh water that is froze 5 months if the year, and rich people, this is the Mecca of used outboards and I have the hook ups

Do they go for cheaper there?

How do I fix this?

How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Re: How do I fix this?

Who is online