Converting counsel to tiller
Posted: Thu Feb 06, 2014 11:34 pmIs it possible? Kinda sick of having the CC in my boat. Motor is a late 80s Evenrude 40 if that matters.
WaterfowlForum.Net
Duck Hunting Forum, Goose Hunting Forum, Waterfowl Hunting, Duck Boats.
https://www.waterfowlforum.net/
Converting counsel to tiller
Page 1 of 2
Posted: Thu Feb 06, 2014 11:34 pmRe: Converting counsel to tiller
Posted: Thu Feb 06, 2014 11:38 pmJust have to buy the tiller, probably $500.00.
Re: Converting counsel to tiller
Posted: Thu Feb 06, 2014 11:38 pmNuffDaddy wrote:Is it possible? Kinda sick of having the CC in my boat. Motor is a late 80s Evenrude 40 if that matters.
Joel's going to be a lawyer?
Re: Converting counsel to tiller
Posted: Thu Feb 06, 2014 11:40 pmAKPirate wrote:NuffDaddy wrote:Is it possible? Kinda sick of having the CC in my boat. Motor is a late 80s Evenrude 40 if that matters.
Joel's going to be a lawyer?
it was my first thoughtRe: Converting counsel to tiller
Posted: Thu Feb 06, 2014 11:42 pmBootlipkiller wrote:AKPirate wrote:NuffDaddy wrote:Is it possible? Kinda sick of having the CC in my boat. Motor is a late 80s Evenrude 40 if that matters.
Joel's going to be a lawyer?
scary brains
Re: Converting counsel to tiller
Posted: Thu Feb 06, 2014 11:43 pmBootlipkiller wrote:Just have to buy the tiller, probably $500.00.
Are you fucking serious?
Re: Converting counsel to tiller
Posted: Thu Feb 06, 2014 11:46 pmassateague wrote:Bootlipkiller wrote:Just have to buy the tiller, probably $500.00.
Are you fucking serious?
As cancer. That's what a guy I know had to pay for one for a 40 hp Yamaha
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 12:43 amDepending on where you live, you can probably trade the center console, the helm and the throttle quadrant for a tiller handle and perhaps some cash too.
Post some pictures of your boat.
Post some pictures of your boat.
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 12:05 pmBootlipkiller wrote:Just have to buy the tiller, probably $500.00.
So the tiller will just mount on the motor and the throttle will hook to that. I'm pretty sure I've seen them for around $300 when I looked a while back. Just didn't know if there was special parts of if everything came with a tiller to mount it and hook it up.
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 12:05 pmAKPirate wrote:NuffDaddy wrote:Is it possible? Kinda sick of having the CC in my boat. Motor is a late 80s Evenrude 40 if that matters.
Joel's going to be a lawyer?
:lol:Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 12:05 pmRonE wrote:Depending on where you live, you can probably trade the center console, the helm and the throttle quadrant for a tiller handle and perhaps some cash too.
Post some pictures of your boat.
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 12:06 pmRe: Converting counsel to tiller
Posted: Fri Feb 07, 2014 4:30 pmYou might just be able to make the entire tiller handle and throttle assembly out of 5200.
But watch out you might get some retard like RonE trying to be the cool guy and try to start shit with you for it.
But watch out you might get some retard like RonE trying to be the cool guy and try to start shit with you for it.
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 4:35 pmGood luck with it, last time I looked this summer, the assemblies were going for over $500, and its a PITA to configure it to tiller. From what ive read its not as easy to convert it. Ive got a very similiar motor, 86 or 87 evinrude 40hp(used to be VRO, bypassed now)
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 4:40 pmIn all seriousness maybe it would be easier to convert to a stick steer. At least you get rid of the bulky console.
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 5:49 pmthe tiller handle mounts to the lever that your steering cable mounts to, it's easy peasyNuffDaddy wrote:Bootlipkiller wrote:Just have to buy the tiller, probably $500.00.
So the tiller will just mount on the motor and the throttle will hook to that. I'm pretty sure I've seen them for around $300 when I looked a while back. Just didn't know if there was special parts of if everything came with a tiller to mount it and hook it up.
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 5:56 pmOk. You guys got me going in circles. Brew says $500 and a pain in the ass...Jehler says it's really easy.
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 6:07 pmNuffDaddy wrote:Ok. You guys got me going in circles. Brew says $500 and a pain in the ass...Jehler says it's really easy.
He may be able to get you the hookup too.
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 6:09 pmNuffDaddy wrote:Ok. You guys got me going in circles. Brew says $500 and a pain in the ass...Jehler says it's really easy.
He may be able to get you the hookup too.
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 7:00 pmFlintRiverFowler wrote:NuffDaddy wrote:Ok. You guys got me going in circles. Brew says $500 and a pain in the ass...Jehler says it's really easy.
He may be able to get you the hookup too.
The handle part is easy, it's the throttle and controls is a pain.
He didn't do shit for me
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 7:01 pmBrewGUN wrote:FlintRiverFowler wrote:NuffDaddy wrote:Ok. You guys got me going in circles. Brew says $500 and a pain in the ass...Jehler says it's really easy.
He may be able to get you the hookup too.
The handle part is easy, it's the throttle and controls is a pain.
He didn't do shit for me
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 7:08 pmBrewGUN wrote:FlintRiverFowler wrote:NuffDaddy wrote:Ok. You guys got me going in circles. Brew says $500 and a pain in the ass...Jehler says it's really easy.
He may be able to get you the hookup too.
The handle part is easy, it's the throttle and controls is a pain.
He didn't do shit for me
That's the part I don't know about. I paid $600 for the motor, so I don't want to spend a shit ton on this. I'll probably just suck it up and deal with the counsel.
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 7:11 pmNuffDaddy wrote:BrewGUN wrote:FlintRiverFowler wrote:NuffDaddy wrote:Ok. You guys got me going in circles. Brew says $500 and a pain in the ass...Jehler says it's really easy.
He may be able to get you the hookup too.
The handle part is easy, it's the throttle and controls is a pain.
He didn't do shit for me
That's the part I don't know about. I paid $600 for the motor, so I don't want to spend a shit ton on this. I'll probably just suck it up and deal with the counsel.
Console
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 7:12 pmAKPirate wrote:NuffDaddy wrote:BrewGUN wrote:FlintRiverFowler wrote:NuffDaddy wrote:Ok. You guys got me going in circles. Brew says $500 and a pain in the ass...Jehler says it's really easy.
He may be able to get you the hookup too.
The handle part is easy, it's the throttle and controls is a pain.
He didn't do shit for me
That's the part I don't know about. I paid $600 for the motor, so I don't want to spend a shit ton on this. I'll probably just suck it up and deal with the counsel.
Console
Thankyou
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 7:13 pmFlintRiverFowler wrote:AKPirate wrote:NuffDaddy wrote:BrewGUN wrote:FlintRiverFowler wrote:NuffDaddy wrote:Ok. You guys got me going in circles. Brew says $500 and a pain in the ass...Jehler says it's really easy.
He may be able to get you the hookup too.
The handle part is easy, it's the throttle and controls is a pain.
He didn't do shit for me
That's the part I don't know about. I paid $600 for the motor, so I don't want to spend a shit ton on this. I'll probably just suck it up and deal with the counsel.
Console
Thankyou
also wrong
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 7:13 pmcapt1972 wrote:FlintRiverFowler wrote:AKPirate wrote:NuffDaddy wrote:BrewGUN wrote:FlintRiverFowler wrote:NuffDaddy wrote:Ok. You guys got me going in circles. Brew says $500 and a pain in the ass...Jehler says it's really easy.
He may be able to get you the hookup too.
The handle part is easy, it's the throttle and controls is a pain.
He didn't do shit for me
That's the part I don't know about. I paid $600 for the motor, so I don't want to spend a shit ton on this. I'll probably just suck it up and deal with the counsel.
Console
Thankyou
also wrong
Ouch. For a spelling bee fan i should be ashamed.
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 7:14 pmcapt1972 wrote:FlintRiverFowler wrote:AKPirate wrote:NuffDaddy wrote:BrewGUN wrote:FlintRiverFowler wrote:NuffDaddy wrote:Ok. You guys got me going in circles. Brew says $500 and a pain in the ass...Jehler says it's really easy.
He may be able to get you the hookup too.
The handle part is easy, it's the throttle and controls is a pain.
He didn't do shit for me
That's the part I don't know about. I paid $600 for the motor, so I don't want to spend a shit ton on this. I'll probably just suck it up and deal with the counsel.
Console
Thankyou
also wrong
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 7:14 pmThe cables come with the tiller kit, easy as separating Benjamin's from your wallet
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 7:15 pmAKPirate wrote:NuffDaddy wrote:BrewGUN wrote:FlintRiverFowler wrote:NuffDaddy wrote:Ok. You guys got me going in circles. Brew says $500 and a pain in the ass...Jehler says it's really easy.
He may be able to get you the hookup too.
The handle part is easy, it's the throttle and controls is a pain.
He didn't do shit for me
That's the part I don't know about. I paid $600 for the motor, so I don't want to spend a shit ton on this. I'll probably just suck it up and deal with the counsel.
Console
You shoulda seen how I had it spelled before autocorrect took over. Took me 2 tries before autocorrect could recognize it as a word.
Re: Converting counsel to tiller
Posted: Fri Feb 07, 2014 7:16 pmjehler wrote:The cables come with the tiller kit, easy as separating Benjamin's from your wallet
How many Benjamin's?
Where do I get one?