How to have your seating die straight...

How to have your seating die straight...

Postby R. Chapman » Wed Jan 22, 2014 11:35 pm

... Wi seat your bullets straight. And it's the most simple thing in the world; plain old washer. But first so Pre-info. One way to get your seating die in the right place screwed down ever time is with the use of washers. Simply take an empty piece of brass and drop into your seater die that is not in the press yet. Now with that piece of brass, put your shell holder on the rim on the brass just like you do when the shell holder is on the press. Now most of the time, there will be space between the top of the shell holder and the bottom of your seating die. Now either find a washer or three as in some cases to where the washer(s) fit in between that space. Now lets take a break for a minute...........

Ok, I'm back. Now take the shell holder off the case and put in the ram of your press and put your washer(s) you used to find the space between the shell holder and the die on top of the shell holder you just put in the ram and run the ram all the way up as far as it will go. Next screw your seater die into the top of the press. Screw with down with two fingers down till it touches the washer(s) and stops with minimal force from your fingers screwing it down. Not snug foen the locking nut and lower ram and go back up to make sure the washers sit flat against the bottom of the die. Just a little trick I learned from an old man that I thought would be useful to share with you guys to make setting your seating die correctly.
assateague wrote:Sometimes the quickest way to put out a fire is with an explosion.
R. Chapman
 
Posts: 6137
Joined: Sat Aug 17, 2013 11:48 pm
Location: Helena, MT

Re: How to have your seating die straight...

Postby Redbeard » Wed Jan 22, 2014 11:40 pm

Zzzzzzzz
gila-river wrote:Great, now the cops want to install dishwashers to. Just do your job Red and stop encroaching on our rights to replace appliances. That is not the responsibility of police.:lol:
User avatar
Redbeard
 
Posts: 20636
Joined: Wed Jun 06, 2012 10:09 pm
Location: Humboldt County

Re: How to have your seating die straight...

Postby Redbeard » Wed Jan 22, 2014 11:41 pm

Kidding Rex. Very informative as usual
gila-river wrote:Great, now the cops want to install dishwashers to. Just do your job Red and stop encroaching on our rights to replace appliances. That is not the responsibility of police.:lol:
User avatar
Redbeard
 
Posts: 20636
Joined: Wed Jun 06, 2012 10:09 pm
Location: Humboldt County

Re: How to have your seating die straight...

Postby R. Chapman » Wed Jan 22, 2014 11:46 pm

It's a lot easier to use washers then to guess.
assateague wrote:Sometimes the quickest way to put out a fire is with an explosion.
R. Chapman
 
Posts: 6137
Joined: Sat Aug 17, 2013 11:48 pm
Location: Helena, MT

Re: How to have your seating die straight...

Postby Redbeard » Wed Jan 22, 2014 11:49 pm

Honestly I didn't read it. Just assumed it was informative
gila-river wrote:Great, now the cops want to install dishwashers to. Just do your job Red and stop encroaching on our rights to replace appliances. That is not the responsibility of police.:lol:
User avatar
Redbeard
 
Posts: 20636
Joined: Wed Jun 06, 2012 10:09 pm
Location: Humboldt County

Re: How to have your seating die straight...

Postby R. Chapman » Wed Jan 22, 2014 11:58 pm

Then spend 3-4 minutes and read it if you reload for metallic.
assateague wrote:Sometimes the quickest way to put out a fire is with an explosion.
R. Chapman
 
Posts: 6137
Joined: Sat Aug 17, 2013 11:48 pm
Location: Helena, MT

Re: How to have your seating die straight...

Postby Tiler_J » Thu Jan 23, 2014 12:07 am

Redbeard wrote:Honestly I didn't read it. Just assumed it was informative

I didn't read it and assumed the opposite. :lol:
Joel Smithjensen
FIREBALL Prostaff
User avatar
Tiler_J
 
Posts: 6098
Joined: Thu Jul 12, 2012 5:43 pm

Re: How to have your seating die straight...

Postby R. Chapman » Thu Jan 23, 2014 12:12 am

You guys need to go fuck off in another thread. This is suppose to be an informative and helpful thread, not a thread to take a shit on someone's resources to help others.
assateague wrote:Sometimes the quickest way to put out a fire is with an explosion.
R. Chapman
 
Posts: 6137
Joined: Sat Aug 17, 2013 11:48 pm
Location: Helena, MT

Re: How to have your seating die straight...

Postby Bootlipkiller » Thu Jan 23, 2014 12:14 am

R. Chapman wrote:You guys need to go fuck off in another thread. This is suppose to be an informative and helpful thread, not a thread to take a shit on someone's resources to help others.
ImageUploadedByTapatalk1390454047.101613.jpg
YOU MUST REGISTER TO VIEW THIS IMAGE.
AKPirate wrote:The sins of Boot and Gaddy are causing the Cali drought and knowing they have no limits to their depravity... :mrgreen:
User avatar
Bootlipkiller
 
Posts: 14361
Joined: Sun Aug 05, 2012 4:47 am
Location: you stay classy Sutter County... Im Ron Burgandy???

Re: How to have your seating die straight...

Postby R. Chapman » Thu Jan 23, 2014 1:31 am

Fuck you and your whore, fatlipsdriller...
assateague wrote:Sometimes the quickest way to put out a fire is with an explosion.
R. Chapman
 
Posts: 6137
Joined: Sat Aug 17, 2013 11:48 pm
Location: Helena, MT

Re: How to have your seating die straight...

Postby Tiler_J » Thu Jan 23, 2014 1:36 am

R. Chapman wrote:Fuck you and your whore, fatlipsdriller...

You got a problem with Boot, fine tell him off. But don't ever make a comment like that one again. You are stepping way over the line.
Joel Smithjensen
FIREBALL Prostaff
User avatar
Tiler_J
 
Posts: 6098
Joined: Thu Jul 12, 2012 5:43 pm

Re: How to have your seating die straight...

Postby R. Chapman » Thu Jan 23, 2014 1:45 am

I take the time to type up some helpful and useful information and I get hassled by some jack offs. I stated a few posts before this to go dick around and play grab ass in a different thread. Apparently my point wasn't made clear.
assateague wrote:Sometimes the quickest way to put out a fire is with an explosion.
R. Chapman
 
Posts: 6137
Joined: Sat Aug 17, 2013 11:48 pm
Location: Helena, MT

Re: How to have your seating die straight...

Postby Redbeard » Thu Jan 23, 2014 1:52 am

Ok guys R. Chapman has had enough and we've all broke the forum rules. And we don't wanna break the forum rules. So let's leave him be
gila-river wrote:Great, now the cops want to install dishwashers to. Just do your job Red and stop encroaching on our rights to replace appliances. That is not the responsibility of police.:lol:
User avatar
Redbeard
 
Posts: 20636
Joined: Wed Jun 06, 2012 10:09 pm
Location: Humboldt County

Re: How to have your seating die straight...

Postby AKPirate » Thu Jan 23, 2014 3:05 am

Fuck this shit about being nice. You wanna fuck with friends and their mommas or kids? You need to get the fuck real.
YouTube Prostaffer
User avatar
AKPirate
WFF Supporter
 
Posts: 9139
Joined: Mon Jun 25, 2012 4:34 pm

Re: How to have your seating die straight...

Postby AKPirate » Thu Jan 23, 2014 3:48 am

Lotsa fucks given Rex, slow your roll.

YouTube Prostaffer
User avatar
AKPirate
WFF Supporter
 
Posts: 9139
Joined: Mon Jun 25, 2012 4:34 pm

Re: How to have your seating die straight...

Postby AKPirate » Thu Jan 23, 2014 3:51 am

YouTube Prostaffer
User avatar
AKPirate
WFF Supporter
 
Posts: 9139
Joined: Mon Jun 25, 2012 4:34 pm

Re: How to have your seating die straight...

Postby Juice Box » Thu Jan 23, 2014 2:48 pm

Rex they were just messing with you you fucking cry baby! Man the fuck up dude!
"Olly cop hater? No

Olly American? Yes"
Juice Box
 
Posts: 841
Joined: Mon Oct 22, 2012 5:51 pm

Re: How to have your seating die straight...

Postby Juice Box » Thu Jan 23, 2014 2:51 pm

ImageUploadedByTapatalk1390506575.131689.jpg

Hey Rex! You know what will make your hurt butt feel better, you licking my butt hole bioooootch!!!
YOU MUST REGISTER TO VIEW THIS IMAGE.
"Olly cop hater? No

Olly American? Yes"
Juice Box
 
Posts: 841
Joined: Mon Oct 22, 2012 5:51 pm

Re: How to have your seating die straight...

Postby R. Chapman » Thu Jan 23, 2014 5:20 pm

Juice Box wrote:Rex they were just messing with you you fucking cry baby! Man the fuck up dude!

Shut up pussy. What's with all this Bro shit too? You wanna be super spade or some shit? These guys don't want to be your bro-Bo and I don't blame them. Now get your old, fey-paddy ass down the street.
assateague wrote:Sometimes the quickest way to put out a fire is with an explosion.
R. Chapman
 
Posts: 6137
Joined: Sat Aug 17, 2013 11:48 pm
Location: Helena, MT

Re: How to have your seating die straight...

Postby assateague » Thu Jan 23, 2014 6:21 pm

See, what we've got here is a textbook example of how not to handle a situation. There are many things to learn in here, RMFC, things which will serve you well in life. Ignore them at your peril.
User avatar
assateague
 
Posts: 23627
Joined: Wed Jun 06, 2012 4:52 pm
Location: Eastern Shore, People's Republic of Maryland

Re: How to have your seating die straight...

Postby Juice Box » Thu Jan 23, 2014 7:15 pm

R. Chapman wrote:
Juice Box wrote:Rex they were just messing with you you fucking cry baby! Man the fuck up dude!

Shut up pussy. What's with all this Bro shit too? You wanna be super spade or some shit? These guys don't want to be your bro-Bo and I don't blame them. Now get your old, fey-paddy ass down the street.

What's a bro-Bo and fey-paddy ass. I don't understand your odd lingo
"Olly cop hater? No

Olly American? Yes"
Juice Box
 
Posts: 841
Joined: Mon Oct 22, 2012 5:51 pm

Re: How to have your seating die straight...

Postby rebelp74 » Thu Jan 23, 2014 7:57 pm

Juice Box wrote:
R. Chapman wrote:
Juice Box wrote:Rex they were just messing with you you fucking cry baby! Man the fuck up dude!

Shut up pussy. What's with all this Bro shit too? You wanna be super spade or some shit? These guys don't want to be your bro-Bo and I don't blame them. Now get your old, fey-paddy ass down the street.

What's a bro-Bo and fey-paddy ass. I don't understand your odd lingo

Probably something to do with a cowboy cookie
Reinstate TomKat

4-20MJ
User avatar
rebelp74
 
Posts: 12506
Joined: Thu Jan 31, 2013 12:49 am
Location: nw louisiana

Re: How to have your seating die straight...

Postby FlintRiverFowler » Thu Jan 23, 2014 7:58 pm

rebelp74 wrote:
Juice Box wrote:
R. Chapman wrote:
Juice Box wrote:Rex they were just messing with you you fucking cry baby! Man the fuck up dude!

Shut up pussy. What's with all this Bro shit too? You wanna be super spade or some shit? These guys don't want to be your bro-Bo and I don't blame them. Now get your old, fey-paddy ass down the street.

What's a bro-Bo and fey-paddy ass. I don't understand your odd lingo

Probably something to do with a cowboy cookie

I don't wana know what a cowboy cookie is
User avatar
FlintRiverFowler
 
Posts: 6386
Joined: Wed May 30, 2012 1:08 pm
Location: Georgia

Re: How to have your seating die straight...

Postby rebelp74 » Thu Jan 23, 2014 8:00 pm

FlintRiverFowler wrote:
rebelp74 wrote:
Juice Box wrote:
R. Chapman wrote:
Juice Box wrote:Rex they were just messing with you you fucking cry baby! Man the fuck up dude!

Shut up pussy. What's with all this Bro shit too? You wanna be super spade or some shit? These guys don't want to be your bro-Bo and I don't blame them. Now get your old, fey-paddy ass down the street.

What's a bro-Bo and fey-paddy ass. I don't understand your odd lingo

Probably something to do with a cowboy cookie

I don't wana know what a cowboy cookie is

Unsurprisingly, it's just a biscuit.
Reinstate TomKat

4-20MJ
User avatar
rebelp74
 
Posts: 12506
Joined: Thu Jan 31, 2013 12:49 am
Location: nw louisiana

Re: How to have your seating die straight...

Postby R. Chapman » Fri Jan 24, 2014 12:41 am

Cowboy cookies have honey an jam on them. They're called cowboy biscuits if theyre dry.
assateague wrote:Sometimes the quickest way to put out a fire is with an explosion.
R. Chapman
 
Posts: 6137
Joined: Sat Aug 17, 2013 11:48 pm
Location: Helena, MT

Re: How to have your seating die straight...

Postby rebelp74 » Fri Jan 24, 2014 2:03 am

Strait Meat Honer
Reinstate TomKat

4-20MJ
User avatar
rebelp74
 
Posts: 12506
Joined: Thu Jan 31, 2013 12:49 am
Location: nw louisiana

Re: How to have your seating die straight...

Postby Juice Box » Fri Jan 24, 2014 1:35 pm

R. Chapman wrote:Cowboy cookies have honey an jam on them. They're called cowboy biscuits if theyre dry.

What's a bro-Bo?
"Olly cop hater? No

Olly American? Yes"
Juice Box
 
Posts: 841
Joined: Mon Oct 22, 2012 5:51 pm

Re: How to have your seating die straight...

Postby R. Chapman » Sat Jan 25, 2014 5:26 pm

Give me a while to think about and I will come to a conclusion.
assateague wrote:Sometimes the quickest way to put out a fire is with an explosion.
R. Chapman
 
Posts: 6137
Joined: Sat Aug 17, 2013 11:48 pm
Location: Helena, MT

Re: How to have your seating die straight...

Postby one2many » Sat Jan 25, 2014 5:53 pm

a melt down that wasnt my own...... i wasnt even around to pile on
No helicopter looking for a murder
Two in the mornin got the Fatburger
Even saw the lights of the Goodyear Blimp
And it read, "Jeffys a pimp"
User avatar
one2many
 
Posts: 5012
Joined: Tue Jun 05, 2012 5:55 pm
Location: 37 miles from the middle of nowhere

Re: How to have your seating die straight...

Postby 3legged_lab » Sat Jan 25, 2014 8:00 pm

Redbeard wrote:Zzzzzzzz

Redbeard wrote:Kidding Rex. Very informative as usual

Redbeard wrote:Ok guys R. Chapman has had enough and we've all broke the forum rules. And we don't wanna break the forum rules. So let's leave him be

Haha
Only the WFF golden boy can pull this shit off.
Bootlipkiller wrote: all the mallards I killed today had boners do to my epic calling.
User avatar
3legged_lab
WFF Supporter
 
Posts: 17344
Joined: Mon Jun 04, 2012 9:19 pm
Location: OREGON

Next

Return to Reloading & Shotshell Forum

Who is online

Users browsing this forum: No registered users and 5 guests