assateague wrote:Sometimes the quickest way to put out a fire is with an explosion.
Bootlipkiller wrote: all the mallards I killed today had boners do to my epic calling.
R. Chapman wrote:one2many wrote:Rex, fine production you made. Well done kid.
However there are some things that will help you out.
1st look for a media tumbler. They don’t cost all that much and your brass will be shiny and new looking.
2nd Get a case gauge for the cartridge you are reloading for. Do not believe that screwing your sizing die down to the shell holder will properly size it. If in time you become more proficient with loading and shooting GET CUSTOM DIES MADE FROM YOUR CHAMBER REAMER.
3rd when you get good at everyday “fun” reloading and want to take the next step. Buy a good digital scale and weigh and sort your brass by weight. It’s a must in hyper performance.
4th buy a Stoney Point or Hornady OAL gauge and learn how to use it. In your factory chambers I would say most loads like a .010” to .015” “jump” to that lands. When you take the next step and go to a custom action that can handle the extra pressure you can start to “jam” to the lands. Each rifle is a little different. I have some that just like to touch the lands and others(made with same reamer)that shoot best with a .005” or so jam
5th buy or make some reloading blocks!!
6th buy a lube pad( RCBS Case Lube Pad works fine) and a spray lube to go onto the pad(HORNADY ONE SHOT SPRAY CASE LUBE or RCBS CASE SLICK SPRAY LUBE) are a couple of the many out there. When I watch your video I only seen you dab a little on the throat but you should be doing all of the body if you are using a full length sizing die. Which you should
7th for God’s sake boy, buy a fucking hand priming tool. They way you are doing is a huge pain in the ass!!!! And I haven’t seen anyone do it that way since I was a little boy in the 70s. They don’t cost much and there are lots to choose from.
8th the reloading press is fine. I have redding, lee,Wilson and rcbs. I have seen guys pull into a shoot in a million dollar Prevost and have a rcbs set up in the trailer pulled by the big RV. Most guys will load at the event just before heading to the line. We have load data for the heat humidity and pressure. its crazy
9th buy Toney Boyer’s book “The Book of Rifle Accuracy”
Tony is hands down the greatest, period!
If you get the chance to attend one of his seminars do it
And finally(since I don’t want to anyone, or want Jim toss out the “sniper” comment. Watch your self shoot. Do you see how the the stock of the rifle is jumping up(way up) when you fire? That’s terrible. And its do to not having good bags and bad bench technique. That rifle should slide straight back into your shoulder the front of the forearm should never ever come off the bag.
Your little Caldwell (cheap) front rest is fine for what you are doing. But real Benchrest shooting its not even close to what you need. I have told you what to buy for a rest and everything else. Save up your money and buy what real Benchrest shooters use. The so called Benchrest shooters you say are tossing their gold ring optics and buying the vortex scopes is bull shit. Here is the list of the brands of scopes that rule Bechchrest . Luppy, Nightforce, and March. Yes there are guys shooting Weaver target as to Sightron target scopes. And at your “clup maybe a few dudes shoot what you have. But full on Comp Benchrest shooters use what I listed.
Its not a cheap game. The stuff is high priced. Lots of the old guys that are at the top of this game have money. The will pull into an event in high dollar RVs. The spend more money on wind flags then what you have wrapped up into your whole rig. I had to be frugal, and saved lots of money doing my own riflesmithing. Guys will order 6-10 new tubes just to find one that will meet their standards. On a side note these guys are great to learn from and most all of them will help you out and even take you under their wings and teach you everything you need to know. You will more then likely shoot over their flags. Just help them out the best you can with setting flags carrying stuff for them and they will teach you shit that cant be learned on the internet or buy guys in your little club.
Keep your eyes and ears open and leave your cocky attitude in the parking lot. Your bullshiting will not fly with these guys. Just be polite and leave your “3 shot group mastery “ at home it will not go over well with the guys. No matter how well you shoot at home it don’t mean shit till you do it in a legit comp.
with your enthusiasm and your age. You could be the next Tony Boyer. I doubt it,because even his wife will out shoot most men.
It a very fun sport with mostly great people. I enjoy the hell out of it even thou I don’t compete as much as I use to….but damn it I like being the best at a video game lol
In that video I was using a neck sizer. Hence the reason why I only applied lube to the mouth of the case.
As far as scales goes, I'm putting away half my tip money for a GemPro 250 that measures to the 1/100s of a grain with +- 2/100s of a grain.
I have a a different way of finding OAL cartridge length using a cheap carbon fiber rod.
I have a butt load of reloading blocks. I hate using them for loading cartridges. I like a slick, flat, even table. That's what works for me. I use my loading blocks to sort casings for number of firings.
Can't stand that sticky shit RCBS lube or others. Had way too many dented case shoulders with those types of lubes because they get galled up in the die. Sizing wax for me whether it be Redding/Imperial or Hornady. then you are fucking up in your reloading
Hand priming tools can suck my dick. I've broken three of those things because they just wear out too easily. When I sit down to reload, I take my time. I don't care if it takes me 3 hours.then you are fucking up in your reloading. we all use a good hand priming tool
Now I am glad that you mentioned the Forend jump. After downloaded the video to my compuker, I realized what I was doing wrong. I only had about 1/4" of gap between the front the rest and the sling swivel stud. For some reason that day, I forgot I need to have about 1.5-2" of space between the bag and the stud.your bench skills are lacking and you have shit bags. if your are going to keep and use that caldwell burn the bags and buy good ones. when you can afford a real front rest buy one. i told you about Seb's rest for the money they cant be beat
Lastly, I'm not getting into BR, but am going to be getting into F-Class TR. I've decided to quit trap shooting. I just got to the point where I wasn't having fun anymore and could stand to be around all of the arrogant cock suckers in the game.
assateague wrote:Sometimes the quickest way to put out a fire is with an explosion.
assateague wrote:Δεν μπορώ να καταλάβω ένα πράγμα βλασφημίας είναι εσείς λένε
assateague wrote:Δεν μπορώ να καταλάβω ένα πράγμα βλασφημίας είναι εσείς λένε
assateague wrote:Sometimes the quickest way to put out a fire is with an explosion.
RonE wrote:http://www.angelfire.com/ma3/max357/houston.html
one2many wrote:RonE wrote:http://www.angelfire.com/ma3/max357/houston.html
more and more guys are building 100 yard tunnels for tunning.
about 5 years ago i put one in for a buddy. we got a hold of a bunch of concrete storm drain. took us a weekend to dig the trench and place the culvert together then cover it all up with dirt.
if i ever get lucky enough to find a huge score of storm drain again i will have a tunnel right off my machine shop backdoor
3200 Man wrote:Then you must know Ken Wickem ( I think his name was ) ? I ordered a few special dies from him ! Nice Guy ,Helpful
one2many wrote:Ron, some of the best shooter i have shot around are out of Texas.Jackie Schmidt is a first rate shooter and great guy from H town. watched and learned a lot, from alot of them guys down that way.
its always a pleasure and a nervous wreck to shoot a table or two over from some of these guys.
i would also say that the vast majority of theses guys will share every bit of information with anyone that wants to learn. its uncommon in most sports
Bootlipkiller wrote: all the mallards I killed today had boners do to my epic calling.
3legged_lab wrote:one2many wrote:Ron, some of the best shooter i have shot around are out of Texas.Jackie Schmidt is a first rate shooter and great guy from H town. watched and learned a lot, from alot of them guys down that way.
its always a pleasure and a nervous wreck to shoot a table or two over from some of these guys.
i would also say that the vast majority of theses guys will share every bit of information with anyone that wants to learn. its uncommon in most sports
I bet the reason is because you can KNOW every bit of it, but if you dont have the ABILITY - you still aint shit.
one2many wrote:3legged_lab wrote:one2many wrote:Ron, some of the best shooter i have shot around are out of Texas.Jackie Schmidt is a first rate shooter and great guy from H town. watched and learned a lot, from alot of them guys down that way.
its always a pleasure and a nervous wreck to shoot a table or two over from some of these guys.
i would also say that the vast majority of theses guys will share every bit of information with anyone that wants to learn. its uncommon in most sports
I bet the reason is because you can KNOW every bit of it, but if you dont have the ABILITY - you still aint shit.
yep.its not a coincidence the best guys are older. there will always be some newer guy that takes home some hardware from time to time, but week to week month to moth the old boys are at the top of the score sheets in every kind of condition all around the country.us younger guys will get there someday(i hope).
i never had nerve trouble doing anything until one shoot down is Texas years ago all the big dogs showed up. just got into my head didnt want to get embarrassed. one of the guys could tell. he asked if i would like to shoot with him, over his flags. it helped calm my nerves and he taught me better flag placement. at the end of the weekend i ended up middle of the pack and i was very very happy for that!
if rex would check his ego at the parking lot he may make it some day
assateague wrote:Sometimes the quickest way to put out a fire is with an explosion.
R. Chapman wrote:one2many wrote:3legged_lab wrote:one2many wrote:Ron, some of the best shooter i have shot around are out of Texas.Jackie Schmidt is a first rate shooter and great guy from H town. watched and learned a lot, from alot of them guys down that way.
its always a pleasure and a nervous wreck to shoot a table or two over from some of these guys.
i would also say that the vast majority of theses guys will share every bit of information with anyone that wants to learn. its uncommon in most sports
I bet the reason is because you can KNOW every bit of it, but if you dont have the ABILITY - you still aint shit.
yep.its not a coincidence the best guys are older. there will always be some newer guy that takes home some hardware from time to time, but week to week month to moth the old boys are at the top of the score sheets in every kind of condition all around the country.us younger guys will get there someday(i hope).
i never had nerve trouble doing anything until one shoot down is Texas years ago all the big dogs showed up. just got into my head didnt want to get embarrassed. one of the guys could tell. he asked if i would like to shoot with him, over his flags. it helped calm my nerves and he taught me better flag placement. at the end of the weekend i ended up middle of the pack and i was very very happy for that!
if rex would check his ego at the parking lot he may make it some day
Though I seem to have a large ego on here, I'm a rather quiet and very detailed oriented person in reality. I love watching rifle competition shooters of any kind shoot whether it be F-Class, Bench Rest, Palma/High Power, or Tactical; I enjoy watching what they do. I can never get enough of it. I'm always getting better reloading equipment, trying to get better shooting form and technique, and a handful of others. I've learned a little bit just watching these guys shoot. Still have more to learn.
rebelp74 wrote:R. Chapman wrote:one2many wrote:3legged_lab wrote:one2many wrote:Ron, some of the best shooter i have shot around are out of Texas.Jackie Schmidt is a first rate shooter and great guy from H town. watched and learned a lot, from alot of them guys down that way.
its always a pleasure and a nervous wreck to shoot a table or two over from some of these guys.
i would also say that the vast majority of theses guys will share every bit of information with anyone that wants to learn. its uncommon in most sports
I bet the reason is because you can KNOW every bit of it, but if you dont have the ABILITY - you still aint shit.
yep.its not a coincidence the best guys are older. there will always be some newer guy that takes home some hardware from time to time, but week to week month to moth the old boys are at the top of the score sheets in every kind of condition all around the country.us younger guys will get there someday(i hope).
i never had nerve trouble doing anything until one shoot down is Texas years ago all the big dogs showed up. just got into my head didnt want to get embarrassed. one of the guys could tell. he asked if i would like to shoot with him, over his flags. it helped calm my nerves and he taught me better flag placement. at the end of the weekend i ended up middle of the pack and i was very very happy for that!
if rex would check his ego at the parking lot he may make it some day
Though I seem to have a large ego on here, I'm a rather quiet and very detailed oriented person in reality. I love watching rifle competition shooters of any kind shoot whether it be F-Class, Bench Rest, Palma/High Power, or Tactical; I enjoy watching what they do. I can never get enough of it. I'm always getting better reloading equipment, trying to get better shooting form and technique, and a handful of others. I've learned a little bit just watching these guys shoot. Still have more to learn.
Why not be yourself always. You'd catch a lot less shit on here.
assateague wrote:Sometimes the quickest way to put out a fire is with an explosion.
rebelp74 wrote:Montana must be excruciatingly boring
assateague wrote:Sometimes the quickest way to put out a fire is with an explosion.
Once in a while I shoot a military bolt action bench match and the same three old timers always clean house. I tell them that its because their weak old heart beats don't don't induce tremors into their rifles.one2many wrote: .....yep.its not a coincidence the best guys are older......
assateague wrote:Put that in your huff-n-puffer and smoke it, shootin' boy.
ducks~n~bucks wrote:After reading this thread, I am wondering how well my dad would shoot his rifle if he had a real bench and sandbags, and better reloading equipment. His current bench he made out of plywood, and it is slightly wobbly, and he has home made sandbags.
assateague wrote:Sometimes the quickest way to put out a fire is with an explosion.
Redbeard wrote:Buy not when. I hit that damne pole
Feelin' Fowl wrote:Big dick cakes are delicious!
Return to Reloading & Shotshell Forum
Users browsing this forum: No registered users and 25 guests