Page 1 of 1

Using TPS wads from BPI with hevishot?

PostPosted: Fri Oct 19, 2012 2:55 pm
by dnj21
Anyone have a good recipie or two for the TPS wads from BPI for heavishot? Jehler and I were disucssing on another thread, thought I should throw it out there rather than continue to hijack the other thread........

Bonus points for use of Longshot, STEEL or Universal Clays :)

Re: Using TPS wads from BPI with hevishot?

PostPosted: Fri Oct 19, 2012 3:17 pm
by jehler
i can't find my manual but i know that 35 grains of steel in a fiochi hull, fiochi 616 primer, tps wad and an ounce and a half of hevi will give you 1300ish fps. i will find my manual and verify that but I know its close. that is a hell of a turkey load with 6's or long distance goose load with 4's but a little heavy for ducks. will look for the manual tonight