WaterfowlForum.Net

mjo27 wrote:Briley or kicks preferably for a SBE2

R. Chapman wrote:

mjo27 wrote:Briley or kicks preferably for a SBE2

If your going to spend the money for an assembly line choke tube that might fit your barrel diameter correctly, have Stu Wright make you a custom choke tube built specifically for your barrel. About $60 is what it would cost but is well worth it. I can give you more info by PM if you're interested...

Flightstopper wrote:Good ol Stu!

jarbo03 wrote:For the money, it is hard to beat Wilson Precision. Kicks seem to deliver tight patterns, but that is not always best. Never had a Briley myself.

I hear that ol Stu gets more ass than Mark McGrath, err I mean 3geese4me.

jarbo03 wrote:For the money, it is hard to beat Wilson Precision. Kicks seem to deliver tight patterns, but that is not always best. Never had a Briley myself.

I hear that ol Stu gets more ass than Mark McGrath, err I mean 3geese4me.

sws002 wrote:

jarbo03 wrote:For the money, it is hard to beat Wilson Precision. Kicks seem to deliver tight patterns, but that is not always best. Never had a Briley myself.

I hear that ol Stu gets more ass than Mark McGrath, err I mean 3geese4me.

. I've heard Stu is a real cocksman!

3geese4me wrote:

jarbo03 wrote:For the money, it is hard to beat Wilson Precision. Kicks seem to deliver tight patterns, but that is not always best. Never had a Briley myself.

I hear that ol Stu gets more ass than Mark McGrath, err I mean 3geese4me.

Wait till I start singing some "sugar ray" songs for the bitches. Panties fly off at terminal velocity.

R. Chapman wrote:

sws002 wrote:

jarbo03 wrote:For the money, it is hard to beat Wilson Precision. Kicks seem to deliver tight patterns, but that is not always best. Never had a Briley myself.

I hear that ol Stu gets more ass than Mark McGrath, err I mean 3geese4me.

. I've heard Stu is a real cocksman!

Your a dipshit if you didn't realize that already. Stu Wright is one of the top shotgun smiths in this country and has been for 40 years. How many gunsmiths do you know that can change the POA to POI on the barrels of a sxs or O/U without unsoldering the barrels to move the POI 8" to the right or some shit. You don't know shit when it comes to fine gunsmiths, especially shotgun smiths. Your just some stupid, snakey motherfucker who works behind a counter trying to sell a POS gun to someone instead of a quality made firearm.

R. Chapman wrote:

sws002 wrote:

jarbo03 wrote:For the money, it is hard to beat Wilson Precision. Kicks seem to deliver tight patterns, but that is not always best. Never had a Briley myself.

I hear that ol Stu gets more ass than Mark McGrath, err I mean 3geese4me.

. I've heard Stu is a real cocksman!

Your a dipshit if you didn't realize that already. Stu Wright is one of the top shotgun smiths in this country and has been for 40 years. How many gunsmiths do you know that can change the POA to POI on the barrels of a sxs or O/U without unsoldering the barrels to move the POI 8" to the right or some shit. You don't know shit when it comes to fine gunsmiths, especially shotgun smiths. Your just some stupid, snakey motherfucker who works behind a counter trying to sell a POS gun to someone instead of a quality made firearm.

jarbo03 wrote:

3geese4me wrote:

jarbo03 wrote:For the money, it is hard to beat Wilson Precision. Kicks seem to deliver tight patterns, but that is not always best. Never had a Briley myself.

I hear that ol Stu gets more ass than Mark McGrath, err I mean 3geese4me.

Wait till I start singing some "sugar ray" songs for the bitches. Panties fly off at terminal velocity.

Do they fly off Conway Twitty fast?

R. Chapman wrote:

sws002 wrote:

jarbo03 wrote:For the money, it is hard to beat Wilson Precision. Kicks seem to deliver tight patterns, but that is not always best. Never had a Briley myself.

I hear that ol Stu gets more ass than Mark McGrath, err I mean 3geese4me.

. I've heard Stu is a real cocksman!

Your a dipshit if you didn't realize that already. Stu Wright is one of the top shotgun smiths in this country and has been for 40 years. How many gunsmiths do you know that can change the POA to POI on the barrels of a sxs or O/U without unsoldering the barrels to move the POI 8" to the right or some shit. You don't know shit when it comes to fine gunsmiths, especially shotgun smiths. Your just some stupid, snakey motherfucker who works behind a counter trying to sell a POS gun to someone instead of a quality made firearm.

sws002 wrote:

R. Chapman wrote:

sws002 wrote:

jarbo03 wrote:For the money, it is hard to beat Wilson Precision. Kicks seem to deliver tight patterns, but that is not always best. Never had a Briley myself.

I hear that ol Stu gets more ass than Mark McGrath, err I mean 3geese4me.

. I've heard Stu is a real cocksman!

Your a dipshit if you didn't realize that already. Stu Wright is one of the top shotgun smiths in this country and has been for 40 years. How many gunsmiths do you know that can change the POA to POI on the barrels of a sxs or O/U without unsoldering the barrels to move the POI 8" to the right or some shit. You don't know shit when it comes to fine gunsmiths, especially shotgun smiths. Your just some stupid, snakey motherfucker who works behind a counter trying to sell a POS gun to someone instead of a quality made firearm.

You best cool your jets you snot nosed little shit. I could give two shits about Stu and his ability to bend barrels and stroke shafts. I've sold probably in the neighborhood of 3,000 guns (and have witnessed about 10,000 more) in my career, I've never had anybody that needed their POI shifted 8". I'd be willing to bet that 99% of the country has no fucking clue who Stu is, and I'll bet they will sleep just fine tonight.

sws002 wrote:

R. Chapman wrote:

sws002 wrote:

jarbo03 wrote:For the money, it is hard to beat Wilson Precision. Kicks seem to deliver tight patterns, but that is not always best. Never had a Briley myself.

I hear that ol Stu gets more ass than Mark McGrath, err I mean 3geese4me.

. I've heard Stu is a real cocksman!

Your a dipshit if you didn't realize that already. Stu Wright is one of the top shotgun smiths in this country and has been for 40 years. How many gunsmiths do you know that can change the POA to POI on the barrels of a sxs or O/U without unsoldering the barrels to move the POI 8" to the right or some shit. You don't know shit when it comes to fine gunsmiths, especially shotgun smiths. Your just some stupid, snakey motherfucker who works behind a counter trying to sell a POS gun to someone instead of a quality made firearm.

You best cool your jets you snot nosed little shit. I could give two shits about Stu and his ability to bend barrels and stroke shafts. I've sold probably in the neighborhood of 3,000 guns (and have witnessed about 10,000 more) in my career, I've never had anybody that needed their POI shifted 8". I'd be willing to bet that 99% of the country has no fucking clue who Stu is, and I'll bet they will sleep just fine tonight.

3geese4me wrote:

jarbo03 wrote:

3geese4me wrote:

jarbo03 wrote:For the money, it is hard to beat Wilson Precision. Kicks seem to deliver tight patterns, but that is not always best. Never had a Briley myself.

I hear that ol Stu gets more ass than Mark McGrath, err I mean 3geese4me.

Wait till I start singing some "sugar ray" songs for the bitches. Panties fly off at terminal velocity.

Do they fly off Conway Twitty fast?

That the nuclear option. Only to be used as a last resort, like the time I pissed myself at the bar and still needed to seal the deal.

jarbo03 wrote:

sws002 wrote:

R. Chapman wrote:

sws002 wrote:

jarbo03 wrote:For the money, it is hard to beat Wilson Precision. Kicks seem to deliver tight patterns, but that is not always best. Never had a Briley myself.

I hear that ol Stu gets more ass than Mark McGrath, err I mean 3geese4me.

. I've heard Stu is a real cocksman!

Your a dipshit if you didn't realize that already. Stu Wright is one of the top shotgun smiths in this country and has been for 40 years. How many gunsmiths do you know that can change the POA to POI on the barrels of a sxs or O/U without unsoldering the barrels to move the POI 8" to the right or some shit. You don't know shit when it comes to fine gunsmiths, especially shotgun smiths. Your just some stupid, snakey motherfucker who works behind a counter trying to sell a POS gun to someone instead of a quality made firearm.

You best cool your jets you snot nosed little shit. I could give two shits about Stu and his ability to bend barrels and stroke shafts. I've sold probably in the neighborhood of 3,000 guns (and have witnessed about 10,000 more) in my career, I've never had anybody that needed their POI shifted 8". I'd be willing to bet that 99% of the country has no fucking clue who Stu is, and I'll bet they will sleep just fine tonight.

Being such a cocksman, I feel I could learn from Stu, unless of course he's into dudes.

DeadEye_Dan wrote:I can tell you've never been this fat before.

R. Chapman wrote:

sws002 wrote:

jarbo03 wrote:For the money, it is hard to beat Wilson Precision. Kicks seem to deliver tight patterns, but that is not always best. Never had a Briley myself.

I hear that ol Stu gets more ass than Mark McGrath, err I mean 3geese4me.

. I've heard Stu is a real cocksman!

Your a dipshit if you didn't realize that already. Stu Wright is one of the top shotgun smiths in this country and has been for 40 years. How many gunsmiths do you know that can change the POA to POI on the barrels of a sxs or O/U without unsoldering the barrels to move the POI 8" to the right or some shit. You don't know shit when it comes to fine gunsmiths, especially shotgun smiths. Your just some stupid, snakey motherfucker who works behind a counter trying to sell a POS gun to someone instead of a quality made firearm.

jarbo03 wrote:That pic kills me every time. I think Rex needs some Midol.

Bootlipkiller wrote:

jarbo03 wrote:That pic kills me every time. I think Rex needs some Midol.

You can not refer to it as simply Midol, it shall be called Naproxen sodium! Damnit!

3legged_lab wrote:

Bootlipkiller wrote:

jarbo03 wrote:That pic kills me every time. I think Rex needs some Midol.

You can not refer to it as simply Midol, it shall be called Naproxen sodium! Damnit!

Thought they were called "cowboy cookie sprinkles"?

Bootlipkiller wrote:

jarbo03 wrote:That pic kills me every time. I think Rex needs some Midol.

You can not refer to it as simply Midol, it shall be called Naproxen sodium! Damnit!

jarbo03 wrote:

Bootlipkiller wrote:

jarbo03 wrote:That pic kills me every time. I think Rex needs some Midol.

You can not refer to it as simply Midol, it shall be called Naproxen sodium! Damnit!

Isn't Naproxen Sodium Aleve? I thought Midol is for when your lady bits are disagreeing with ya.