Will this shit work...

Honk!

Will this shit work...

Postby NuffDaddy » Sun Dec 22, 2013 6:14 pm

User avatar
NuffDaddy
WFF Forum Moderator
 
Posts: 10142
Joined: Sun Aug 19, 2012 2:05 pm
Location: Saginaw Bay, Michigan

Re: Will this shit work...

Postby 3legged_lab » Sun Dec 22, 2013 6:20 pm

I had some sillos made out of that stuff. They used about an 1/8" galvanized wire for stakes.
Bootlipkiller wrote: all the mallards I killed today had boners do to my epic calling.
User avatar
3legged_lab
WFF Supporter
 
Posts: 17344
Joined: Mon Jun 04, 2012 9:19 pm
Location: OREGON

Re: Will this shit work...

Postby NuffDaddy » Sun Dec 22, 2013 6:24 pm

3legged_lab wrote:I had some sillos made out of that stuff. They used about an 1/8" galvanized wire for stakes.

They hold up good? Don't bend or break to easily? It's either this or plywood. Don't have the money for the "good" kind.
User avatar
NuffDaddy
WFF Forum Moderator
 
Posts: 10142
Joined: Sun Aug 19, 2012 2:05 pm
Location: Saginaw Bay, Michigan

Re: Will this shit work...

Postby 3legged_lab » Sun Dec 22, 2013 6:36 pm

Dont know, I don't like sillos, traded them and some other sillos for a layout blind
Bootlipkiller wrote: all the mallards I killed today had boners do to my epic calling.
User avatar
3legged_lab
WFF Supporter
 
Posts: 17344
Joined: Mon Jun 04, 2012 9:19 pm
Location: OREGON

Re: Will this shit work...

Postby NuffDaddy » Sun Dec 22, 2013 7:30 pm

3legged_lab wrote:Dont know, I don't like sillos, traded them and some other sillos for a layout blind

Got ya. I'm planning in making a ton of them and just hoping the numbers game will work for me. I can make 90 of em for about $150. Planning on mixing in my dozen floaters and my buddy's half dozen shells for this late season.
User avatar
NuffDaddy
WFF Forum Moderator
 
Posts: 10142
Joined: Sun Aug 19, 2012 2:05 pm
Location: Saginaw Bay, Michigan

Re: Will this shit work...

Postby assateague » Sun Dec 22, 2013 7:49 pm

Lots of guys around here run them, with good results. I've used them quite a bit, usually made out of the same stuff, but from signs that I assumed were old and were free for the taking. I like them, but they don't last real long. They may last longer if you baby them, but since I only had a couple cans of Krylon into them, I was never very careful. I use a piece of wire I use for my snares, bent into a "flat" Z, and use the flat part as a step. Put a couple twists of electrical tape around the top, to keep it from sliding deeper into the plastic. I think the wire I use is 10 gauge or so- the silos will actually "wobble" a little in a breeze, which was an unexpected bonus. I originally used it because I'm cheap, and I had it. The bad is that if it's really windy, they'll just lay down flat, so I can't use them.
User avatar
assateague
 
Posts: 23627
Joined: Wed Jun 06, 2012 4:52 pm
Location: Eastern Shore, People's Republic of Maryland

Re: Will this shit work...

Postby assateague » Sun Dec 22, 2013 7:50 pm

And only make feeders. Sentries out of that plastic will last about 1 hunt before they're neck is floppy as a $6 drunk.
User avatar
assateague
 
Posts: 23627
Joined: Wed Jun 06, 2012 4:52 pm
Location: Eastern Shore, People's Republic of Maryland

Re: Will this shit work...

Postby NuffDaddy » Sun Dec 22, 2013 8:00 pm

Ok. Thanks Assa. I'm trying to decide between cheap plywood and this plastic. I'm kinda worried about the plywood delaminating on me, but I feel like they will last longer. Price isn't much different between the 2 and weight isn't really an issue.
User avatar
NuffDaddy
WFF Forum Moderator
 
Posts: 10142
Joined: Sun Aug 19, 2012 2:05 pm
Location: Saginaw Bay, Michigan

Re: Will this shit work...

Postby NuffDaddy » Sun Dec 22, 2013 8:01 pm

Maybe I'll just use plywood. Don't have to order it online and probably will last a little longer.
User avatar
NuffDaddy
WFF Forum Moderator
 
Posts: 10142
Joined: Sun Aug 19, 2012 2:05 pm
Location: Saginaw Bay, Michigan

Re: Will this shit work...

Postby assateague » Sun Dec 22, 2013 8:02 pm

Plastic is easier to get a wire on for a stand than plywood. And the plywood a heavier than you think- I had 4 plywood silos for turkey hunting, and I almost guarantee they were as heavy as a dozen plastic geese.
User avatar
assateague
 
Posts: 23627
Joined: Wed Jun 06, 2012 4:52 pm
Location: Eastern Shore, People's Republic of Maryland

Re: Will this shit work...

Postby jehler » Sun Dec 22, 2013 8:13 pm

What kinda Topwater uses silhouettes?
FREE THE QUOTE STREAM!
User avatar
jehler
 
Posts: 11453
Joined: Wed Jun 06, 2012 6:18 pm

Re: Will this shit work...

Postby assateague » Sun Dec 22, 2013 8:14 pm

Me and Sean Mann.
User avatar
assateague
 
Posts: 23627
Joined: Wed Jun 06, 2012 4:52 pm
Location: Eastern Shore, People's Republic of Maryland

Re: Will this shit work...

Postby NuffDaddy » Sun Dec 22, 2013 8:31 pm

jehler wrote:What kinda Topwater uses silhouettes?

A broke ass college kid
User avatar
NuffDaddy
WFF Forum Moderator
 
Posts: 10142
Joined: Sun Aug 19, 2012 2:05 pm
Location: Saginaw Bay, Michigan

Re: Will this shit work...

Postby NuffDaddy » Sun Dec 22, 2013 8:33 pm

assateague wrote:Plastic is easier to get a wire on for a stand than plywood. And the plywood a heavier than you think- I had 4 plywood silos for turkey hunting, and I almost guarantee they were as heavy as a dozen plastic geese.

I think I'm going to try and make a couple out of some scrap plywood I have laying around and see how They work. If I don't like it then I'll use the plastic.
User avatar
NuffDaddy
WFF Forum Moderator
 
Posts: 10142
Joined: Sun Aug 19, 2012 2:05 pm
Location: Saginaw Bay, Michigan

Re: Will this shit work...

Postby jehler » Sun Dec 22, 2013 8:34 pm

assateague wrote:Me and Sean Mann.
sean is Jewish to?
FREE THE QUOTE STREAM!
User avatar
jehler
 
Posts: 11453
Joined: Wed Jun 06, 2012 6:18 pm

Re: Will this shit work...

Postby assateague » Sun Dec 22, 2013 8:39 pm

I don't know. I've never seen his dick.
User avatar
assateague
 
Posts: 23627
Joined: Wed Jun 06, 2012 4:52 pm
Location: Eastern Shore, People's Republic of Maryland

Re: Will this shit work...

Postby 3legged_lab » Sun Dec 22, 2013 9:29 pm

assateague wrote:I don't know. I've never seen his dick.

Jehler has seen your dick?
Bootlipkiller wrote: all the mallards I killed today had boners do to my epic calling.
User avatar
3legged_lab
WFF Supporter
 
Posts: 17344
Joined: Mon Jun 04, 2012 9:19 pm
Location: OREGON

Re: Will this shit work...

Postby Olly » Sun Dec 22, 2013 9:30 pm

$110 bucks? Plywood?
“If ye love wealth better than liberty, the tranquility of servitude better than the animating contest of freedom, go home from us in peace. We ask not your counsels or arms. Crouch down and lick the hands which feed you. May your chains set lightly upon you, and may posterity forget that ye were our countrymen.” ― Samuel Adams
User avatar
Olly
WFF Administrator
 
Posts: 15522
Joined: Wed May 30, 2012 9:05 am

Re: Will this shit work...

Postby NuffDaddy » Sun Dec 22, 2013 9:35 pm

Olly wrote:$110 bucks? Plywood?

What?
User avatar
NuffDaddy
WFF Forum Moderator
 
Posts: 10142
Joined: Sun Aug 19, 2012 2:05 pm
Location: Saginaw Bay, Michigan

Re: Will this shit work...

Postby assateague » Sun Dec 22, 2013 9:45 pm

Olly wrote:$110 bucks? Plywood?



No, that's for 10 4x8 sheets of corruplast.
User avatar
assateague
 
Posts: 23627
Joined: Wed Jun 06, 2012 4:52 pm
Location: Eastern Shore, People's Republic of Maryland

Re: Will this shit work...

Postby Olly » Sun Dec 22, 2013 9:55 pm

Sorry I meant $110 bucks for some Damn plastic. Why not use 1/4" plywood?
“If ye love wealth better than liberty, the tranquility of servitude better than the animating contest of freedom, go home from us in peace. We ask not your counsels or arms. Crouch down and lick the hands which feed you. May your chains set lightly upon you, and may posterity forget that ye were our countrymen.” ― Samuel Adams
User avatar
Olly
WFF Administrator
 
Posts: 15522
Joined: Wed May 30, 2012 9:05 am

Re: Will this shit work...

Postby Olly » Sun Dec 22, 2013 9:56 pm

Oh I didn't see where it was for 10 sheets. Thought it was for one.
“If ye love wealth better than liberty, the tranquility of servitude better than the animating contest of freedom, go home from us in peace. We ask not your counsels or arms. Crouch down and lick the hands which feed you. May your chains set lightly upon you, and may posterity forget that ye were our countrymen.” ― Samuel Adams
User avatar
Olly
WFF Administrator
 
Posts: 15522
Joined: Wed May 30, 2012 9:05 am

Re: Will this shit work...

Postby 3geese4me » Sun Dec 22, 2013 10:09 pm

jehler wrote:What kinda Topwater uses silhouettes?

Me too....I'm not Jewish either, nor have I seen Sean Mann's dick.
http://www.facebook.com/BeakSquad

Gander Commander Pro-Staff for Waterfowlforum.net
US AIR FORCE PRO-STAFF
User avatar
3geese4me
 
Posts: 2691
Joined: Mon Jan 28, 2013 10:25 pm
Location: Alaska

Re: Will this shit work...

Postby assateague » Sun Dec 22, 2013 10:10 pm

A likely story.
User avatar
assateague
 
Posts: 23627
Joined: Wed Jun 06, 2012 4:52 pm
Location: Eastern Shore, People's Republic of Maryland

Re: Will this shit work...

Postby 3geese4me » Sun Dec 22, 2013 10:21 pm

assateague wrote:A likely story.

Promise!
http://www.facebook.com/BeakSquad

Gander Commander Pro-Staff for Waterfowlforum.net
US AIR FORCE PRO-STAFF
User avatar
3geese4me
 
Posts: 2691
Joined: Mon Jan 28, 2013 10:25 pm
Location: Alaska

Re: Will this shit work...

Postby 3geese4me » Sun Dec 22, 2013 10:24 pm

Nuff, I don't know how broke you are. But I would really look at the Real Geese Pro Series 2's. If you shop around you can find them for $170 a doz. Buy a dozen every month and you will have 8-10 dozen by next season. I run 10 dozen and have no regrets with switching from fullbodies.
http://www.facebook.com/BeakSquad

Gander Commander Pro-Staff for Waterfowlforum.net
US AIR FORCE PRO-STAFF
User avatar
3geese4me
 
Posts: 2691
Joined: Mon Jan 28, 2013 10:25 pm
Location: Alaska

Re: Will this shit work...

Postby NuffDaddy » Sun Dec 22, 2013 10:25 pm

Olly wrote:Oh I didn't see where it was for 10 sheets. Thought it was for one.

I have to order it online too, so I can't really see what it looks like before I buy it. I think the cheap pine plywood is like $13/sheet, so it won't be a whole lot more expensive. And I really don't need 10 sheets either.
User avatar
NuffDaddy
WFF Forum Moderator
 
Posts: 10142
Joined: Sun Aug 19, 2012 2:05 pm
Location: Saginaw Bay, Michigan

Re: Will this shit work...

Postby NuffDaddy » Sun Dec 22, 2013 10:31 pm

3geese4me wrote:Nuff, I don't know how broke you are. But I would really look at the Real Geese Pro Series 2's. If you shop around you can find them for $170 a doz. Buy a dozen every month and you will have 8-10 dozen by next season. I run 10 dozen and have no regrets with switching from fullbodies.

I know that's the better way to go, but I really can't spend that kind of money. I barely made my tuition payment this semester, so I'm cutting back on a ton until I get next years tuition sitting in an account. Maybe once the next season comes around I'll be able to get a couple dozen.
Good to hear they work good for you. Full bodies are definitely out of budget.
User avatar
NuffDaddy
WFF Forum Moderator
 
Posts: 10142
Joined: Sun Aug 19, 2012 2:05 pm
Location: Saginaw Bay, Michigan

Re: Will this shit work...

Postby 3geese4me » Sun Dec 22, 2013 10:33 pm

NuffDaddy wrote:
3geese4me wrote:Nuff, I don't know how broke you are. But I would really look at the Real Geese Pro Series 2's. If you shop around you can find them for $170 a doz. Buy a dozen every month and you will have 8-10 dozen by next season. I run 10 dozen and have no regrets with switching from fullbodies.

I know that's the better way to go, but I really can't spend that kind of money. I barely made my tuition payment this semester, so I'm cutting back on a ton until I get next years tuition sitting in an account. Maybe once the next season comes around I'll be able to get a couple dozen.
Good to hear they work good for you. Full bodies are definitely out of budget.

I hear ya!
http://www.facebook.com/BeakSquad

Gander Commander Pro-Staff for Waterfowlforum.net
US AIR FORCE PRO-STAFF
User avatar
3geese4me
 
Posts: 2691
Joined: Mon Jan 28, 2013 10:25 pm
Location: Alaska

Re: Will this shit work...

Postby 3legged_lab » Sun Dec 22, 2013 10:48 pm

Check the cost of the luan plywood at home depot, it should be less than $13 per sheet. I think its 3/8".
Bootlipkiller wrote: all the mallards I killed today had boners do to my epic calling.
User avatar
3legged_lab
WFF Supporter
 
Posts: 17344
Joined: Mon Jun 04, 2012 9:19 pm
Location: OREGON

Next

Return to Goose Hunting Forum

Who is online

Users browsing this forum: No registered users and 27 guests